WP 34S: GTO.. behaviour

[Didier Lachieze]

(08-12-2014 07:42 AM)Paul Dale Wrote:  GTO . . puts you at step 0 of the current program.

Well, at least in the latest revision V3.3 rev 3678, GTO . . puts the program counter on the last END of the last program in the RAM (which is different from what's documented in the manual).

So if you have a first program using labels A, B, C or D and another one not using any of the A,B,C,D labels (for example: LBL "END" END) as the last one, then with GTO . . you will go at the END of the program "END" and the default functions of the keys A, B, C and D will be active:

Code:

LBL "XYZ"
LBL A
...
LBL B
...
END
LBL "END"
END                   <= GTO . . will go there

This works also without the LBL "END", with just two consecutive END at the end of the RAM.