Post Reply 
HP-97 card reader cable problem
04-16-2021, 08:45 PM
Post: #2
RE: HP-97 card reader cable problem
A while back when working on a 97 I fabricated a cable removal tool. Using some 0.009 inch sheet metal from the local hobby shop, I cut a number of connector-with strips, then covered one side of one end with kapton tape (for the cable-side). Works great!

To insert the damaged cable, you might try wrapping some kapton tape over the end by a small amount, maybe 1/16 inch. The connector contacts are recessed a little so the kapton shouldn't interfere with the contacts.

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-97 card reader cable problem - jlw - 04-16-2021, 08:13 PM
RE: HP-97 card reader cable problem - Dave Frederickson - 04-16-2021 08:45 PM



User(s) browsing this thread: 1 Guest(s)