HP-97 Circuit
|
04-15-2021, 01:19 AM
(This post was last modified: 04-15-2021 01:34 AM by teenix.)
Post: #1
|
|||
|
|||
HP-97 Circuit
Hi all,
I found some more circuit diagram issues with the HP-97 service manual. (1) Q4 is supposed to be a NPN type but is shown as PNP. (2) There is an extra wire connects Vb to R7, Q4 emitter and Q2 base. Modified schematic attached. Edit: I've posted a modified Service manual at http://www.teenix.org/97ServMan.pdf It also has cleaned up oscilloscope images. cheers Tony |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HP-97 Circuit - teenix - 04-15-2021 01:19 AM
RE: HP-97 Circuit - AndiGer - 04-15-2021, 07:47 AM
RE: HP-97 Circuit - teenix - 04-15-2021, 10:03 AM
RE: HP-97 Circuit - hpux735 - 10-11-2021, 05:15 PM
RE: HP-97 Circuit - Kees Bouw - 10-11-2021, 07:02 PM
RE: HP-97 Circuit - hpux735 - 10-11-2021, 08:03 PM
RE: HP-97 Circuit - AndiGer - 04-15-2021, 03:31 PM
RE: HP-97 Circuit - teenix - 04-16-2021, 05:14 AM
RE: HP-97 Circuit - AndiGer - 04-16-2021, 06:59 PM
RE: HP-97 Circuit - teenix - 04-16-2021, 09:15 PM
RE: HP-97 Circuit - AndiGer - 04-17-2021, 08:54 AM
RE: HP-97 Circuit - Siegfried - 04-27-2021, 11:00 AM
RE: HP-97 Circuit - Kees Bouw - 10-11-2021, 07:09 PM
RE: HP-97 Circuit - Eric Rechlin - 10-11-2021, 07:59 PM
|
User(s) browsing this thread: 1 Guest(s)