Post Reply 
monic part 1: connecting the display
06-12-2020, 03:09 AM (This post was last modified: 06-23-2020 04:14 AM by F-73P.)
Post: #4
RE: monic part 1: connecting the display
3) Writing to the display (continued)

The code is downloaded and the debugger launched. Press “Step Into” (at the top of the screen) twice, then press “Step Over” (next to "Step Into") three times to execute the functions:

[Image: 49996749901_7162b98fc5_z.jpg]

[Image: 49994074738_69603141bd_z.jpg]

Then press “Step Into” once more to execute the “SysTick->CTRL = 0;” instruction. Scroll down and place the mouse in the blue shaded area to the left of the function call “printString(“monic 1.0”);”. Right click and select “Toggle Breakpoint”. Press “Resume” at the top of the screen (green arrow to the left of "Step Into") to execute the code up to the breakpoint. Now press “Step Over”:

[Image: 49994074623_07d92b5b5a_z.jpg]

The text “monic 1.0” is displayed on the screen:

[Image: 49996314803_be896e29f7_z.jpg]

Next: monic part 2: connecting the keypad
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: monic part 1: connecting the display - F-73P - 06-12-2020 03:09 AM



User(s) browsing this thread: 1 Guest(s)