HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP-45 With Shielding?

Post Reply 
HP-45 With Shielding?
03-20-2020, 08:31 PM (This post was last modified: 03-21-2020 12:40 AM by JohnRausch.)
Post: #1
JohnRausch Offline
Junior Member
 		Posts: 19
Joined: Mar 2015
HP-45 With Shielding?
Has anyone seen an HP-45 with metal shielding under the back cover and surrounding the display?

The two pieces in the back cover are connected with a small wirw near the base and there is a spring connector that might be touching ground -- I haven't checked yet

[Image: hp45shielding.jpg]
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP-45 With Shielding? - JohnRausch - 03-20-2020 08:31 PM
RE: HP-45 With Shielding? - aurelio - 03-20-2020, 11:10 PM
RE: HP-45 With Shielding? - [kby] - 03-21-2020, 12:27 AM
RE: HP-45 With Shielding? - JohnRausch - 03-21-2020, 03:57 AM
RE: HP-45 With Shielding? - TomC - 03-21-2020, 12:31 PM
RE: HP-45 With Shielding? - aurelio - 03-21-2020, 07:51 PM
RE: HP-45 With Shielding? - Guy Macon - 03-22-2020, 03:49 PM
RE: HP-45 With Shielding? - JohnRausch - 03-22-2020, 05:53 PM
RE: HP-45 With Shielding? - Steve Simpkin - 03-22-2020, 11:17 PM
RE: HP-45 With Shielding? - BruceH - 05-14-2020, 02:18 PM
RE: HP-45 With Shielding? - BusyCalc - 05-14-2020, 11:13 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication