Post Reply 
Repairing & restoring HP82002 - advice needed
09-14-2019, 12:13 AM
Post: #2
RE: Repairing & restoring HP82002 - advice needed
You could try just measuring the AC output voltage from the transformer. With nothing connected to the charger it should be close to the no load voltage, or disconnect the transformer output entirely before measuring. From reading around, I thought it may about 16VAC but not sure. The voltage rating of the 400uF capacitor may give a clue.

Be careful poking around mains voltages :-)

cheers

Tony
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Repairing & restoring HP82002 - advice needed - teenix - 09-14-2019 12:13 AM



User(s) browsing this thread: 1 Guest(s)