Post Reply 
HP30b to WP34s Programming in Melbourne
08-30-2019, 01:00 PM
Post: #17
RE: HP30b to WP34s Programming in Melbourne
My grateful thanks to jebem, Jaco, Pauli and Nigel for your messages above.
Your information and explanations have provided huge clarity about the WP34S and the associated creation tools required. Thank you.

After considering your comments, I'll use the standard official release in the http://svn.code.sf.net/p/wp34s/code/trunk/realbuild/ folder. It includes the tanh-sinh integrator by emece67. I've downloaded the calc_full.bin file.

I managed to purchase a genuine NOS HP flash cable, which I should receive in a couple of weeks. I've also purchased the FTDI Chip USB to RS232 adapter, so the remaining step is to setup the programming software and program the HP30b. Nearly done!

If all goes to plan, I should be able to do the programming task myself, in which case I shouldn't need to take up the programming offers by JimP and Pauli. Thanks again to you both for your offers to assist.

I will let you know how it turns out. Hopefully I'll have good news!!
With kind regards.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP30b to WP34s Programming in Melbourne - nova - 08-30-2019 01:00 PM



User(s) browsing this thread: 1 Guest(s)