Post Reply 
(SOLVED) 41CL - DOUBLE HEPAX ACCESS and MMU CONFIG
08-17-2019, 02:45 PM (This post was last modified: 08-17-2019 03:11 PM by Podalirius.)
Post: #9
RE: 41CL - DOUBLE HEPAX ACCESS
Hi, I very appreciate all your efforts!!!
I am not an assembler programmer,
however I am very interested to learn something more, as the 41CL manuals
are for me a bit difficult, so I ask Mr. Sylvain Cote
to continue with his explications on CFGINI and MMU(s) settings,
so useful and clear for me! (and maybe also for others)

My first question was on the possility to have two
HEPAX installations in two separate MMU,
also without use CFGINI, but I am very interested also
on CFGINI and MMU(s) settings, so I decided to wait for
all your explications to learn more, before try to configure
the MMU(s) with CFGINI.

On CFGINI use, I triyed working with the MMU(s) installed by CFGINI, in maybe every mode
but is impossible and also a powerful source of MEMORY LOST,
because with EXCFG and RCLCFG the modules are superimposed
in ports so is possible that more ports are linked to the same module.
Even if I use PPLUG to delete a module and insert the new correct module
the MEMORY LOST error is a possibility very real!

I hope in your help!
I thank you ALL so much!!!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 41CL - DOUBLE HEPAX ACCESS - Podalirius - 08-17-2019 02:45 PM



User(s) browsing this thread: 1 Guest(s)