Post Reply 
HP 50g questions
03-23-2019, 09:52 AM (This post was last modified: 03-23-2019 10:00 AM by Lode.)
Post: #1
HP 50g questions
Hi,

A few things I'm wondering about the HP 50G:

1. Does it support operations like sqrt/exp/log/... on matrices? HP Prime does in CAS mode only, but on HP 50g it only gives "Bad Argument Type". Is there any way, e.g. with some combination of modes?

2. In RPN mode, you are required to hold down shift and F keys at the same time to use the graph functions rather than first shift then F key. Why is this, and why only in RPN? It's a bit of an unintuitive and painful key combination to execute.

3. Is there any way to visually see if there is a next menu for the "nxt" button at the horizongal buttom menu row (without trying by actually pressing "nxt")?

4. If I would download a program that has "erf" and "erfc" functions (or program them), is there any way that you can then add these erf and erfc in the built-in "special functions" menu or can custom functions only go in different menus?

Thanks Smile
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 50g questions - Lode - 03-23-2019 09:52 AM
RE: HP 50g questions - John Keith - 03-23-2019, 08:34 PM
RE: HP 50g questions - Lode - 03-23-2019, 09:07 PM
RE: HP 50g questions - DavidM - 03-24-2019, 12:05 AM
RE: HP 50g questions - TravisE - 03-28-2019, 01:49 AM
RE: HP 50g questions - Joe Horn - 03-28-2019, 04:57 AM
RE: HP 50g questions - franz.b - 03-28-2019, 07:18 AM
RE: HP 50g questions - Joe Horn - 03-28-2019, 12:10 PM
RE: HP 50g questions - franz.b - 03-28-2019, 02:50 PM
RE: HP 50g questions - Gerald H - 03-24-2019, 10:55 AM
RE: HP 50g questions - Lode - 03-25-2019, 12:43 AM
RE: HP 50g questions - Gerald H - 03-25-2019, 05:18 AM
RE: HP 50g questions - Lode - 03-25-2019, 08:02 PM



User(s) browsing this thread: 1 Guest(s)