Benchmarks 71B versus 48GX

[J-F Garnier]

(06-17-2020 11:43 AM)KimH Wrote:  In later years - i think mid 86, they started to mount the 1LK7 on the PCB.

There is no way - that I know - to see the actual CPU version without opening the Case.

If it's really a 1LK7 then it's the same than used in the 28C and it supports the PC=(A) opcode. It may be a way to detect the CPU version by software. I may try.

Quote:If it is 1LK7, the LC circuit can be modified to run at about 1MHz - at about 1.1MHz the CPU starts to become unreliable.

If it starts to fail at about 1.1MHz, I would not push it to about 1MHz :-)

J-F