RPL solver question: HP-50G vs HP-48SX
|
05-01-2014, 07:32 AM
(This post was last modified: 05-01-2014 07:38 AM by Joe Horn.)
Post: #6
|
|||
|
|||
RE: RPL solver question: HP-50G vs HP-48SX
(05-01-2014 01:40 AM)rprosperi Wrote:(04-30-2014 11:53 PM)Jeff_Kearns Wrote: Both methods you suggest bring up the TVM input screen... OH NOES! Sorry... I have had a key assignment on LS+9 for so long that I forgot it isn't built in. <slaps self> In essence, I did the following one time many years ago: << 79 TMENU >> 74.21 ASN After making that assignment, LS+9 (with the "+" meaning that the left-shift is held down while pressing the 9 key) launches menu 79, same as RS+7, F5, as Bob mentioned above. Needless to say, I leave USER mode turned on all the time. I currently have ... let's see ... RCLKEYS SIZE 1 – 2 / ... 90 key assignments, and I use them so often that I don't need any keyboard overlays or stickers. There's no need to wrestle with HP's suboptimal keyboard choices when you can create your own key assignments. But I must learn to stop assuming that everybody has my key assignments. Sorry about that! Edit: My choice for LS+9 is of course modeled on the existing 50g key definitions for RS-9 and RS+9, which parallel the 48G's RS-4 and LS-4, respectively. <0|ɸ|0> -Joe- |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
RPL solver question: HP-50G vs HP-48SX - Jeff_Kearns - 04-30-2014, 10:37 PM
RE: RPL solver question: HP-50G vs HP-48SX - Joe Horn - 04-30-2014, 11:42 PM
RE: RPL solver question: HP-50G vs HP-48SX - Jeff_Kearns - 04-30-2014, 11:53 PM
RE: RPL solver question: HP-50G vs HP-48SX - rprosperi - 05-01-2014, 01:40 AM
RE: RPL solver question: HP-50G vs HP-48SX - Jeff_Kearns - 05-01-2014, 01:50 AM
RE: RPL solver question: HP-50G vs HP-48SX - Joe Horn - 05-01-2014 07:32 AM
|
User(s) browsing this thread: 1 Guest(s)