Post Reply 
41CL UPDATING PROBLEMS
11-01-2018, 07:57 AM
Post: #1
41CL UPDATING PROBLEMS
Hi, I tried to update my 41CL V5 with the clupdate program.
I started it from my Xubuntu computer with:
java -jar clupdate-1.1.0.jar --update ~/tmp/rom_files_180927.zip /dev/ttyS0 4800.
On the 41CL I typed the command XEQ "CMOPEN"
The 41CL display COMM, and after TIME OUT.
Some technical data for those try to help me:
I connected 41CL to the PC via the original cable to a real serial port,
that on my system is /dev/ttyS0. I know the port is working because I use
it also to connect my hp 95LX + dockstation via Kermit.
The Xubuntu version is 18.04
My 41CL runs now rom_file_180706.zip
On the 41CL I installed the YUPS module, and with CAT 2
I can read UPDAT 3B.
I used very fresh recharged batteries.
Of course I made the rom_file_180927.zip present in the ~/tmp directory.
After this tray, ALL MMU configuration of the 41CL is LOST!!!
I reinstalled my MMU config and repested the tray many times without
difference: 41CL TIME OUT plus MMU config LOST.
I thank you so much for all, very appreciated, help!!!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
41CL UPDATING PROBLEMS - Podalirius - 11-01-2018 07:57 AM
RE: 41CL UPDATING PROBLEMS - Sylvain Cote - 11-01-2018, 11:31 AM
RE: 41CL UPDATING PROBLEMS - Podalirius - 11-01-2018, 01:17 PM
RE: 41CL UPDATING PROBLEMS - burkhard - 11-01-2018, 01:43 PM
RE: 41CL UPDATING PROBLEMS - Sylvain Cote - 11-01-2018, 02:22 PM
RE: 41CL UPDATING PROBLEMS - Podalirius - 11-01-2018, 03:05 PM
RE: 41CL UPDATING PROBLEMS - Ángel Martin - 11-02-2018, 06:09 AM



User(s) browsing this thread: 1 Guest(s)