Post Reply 
(41) Bulk Cylindrical Tank
10-15-2018, 08:37 PM
Post: #45
RE: (41) Bulk Cylindrical Tank
(10-15-2018 05:52 PM)Albert Chan Wrote:  There must be a reason he measured R of 78" (not calculated 90")

I just came across another problem. The formula for the spherical dome top include R and Vo as parameters. We have already seen that R=78 does not match Vo=36. But if you do the calculation with these two contradicting parameters, as suggested in the paper and shown in the results in table 25-3, you get volumes that are less (!) than those with R=90 and V0=36. This is because you do not (!) calculate the volume within the green line in the sketch above. To calculate the latter Vo would have to be adjusted to 48".

Here are some results for different ombinations of R and Vo.

Code:
level     R=90 Vo=36     R=78 Vo=36     R=78 Vo=48     Ellipsoid
----------------------------------------------------------------
 198        13509          13444          13521          13533
 208        14035          13889          14118          14167
 218        14370          14175          14591          14628
 228        14488          14276          14911          14805

I wonder what the figures in the R=78 and Vo=36 column mean. They are the lowest of all possible parameter combinations.

Dieter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(41) Bulk Cylindrical Tank - SlideRule - 10-08-2018, 09:13 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-10-2018, 04:58 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-11-2018, 07:38 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-10-2018, 08:36 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-12-2018, 12:04 AM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-12-2018, 09:27 PM
RE: (41) Bulk Cylindrical Tank - Geoff - 10-12-2018, 02:46 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-12-2018, 08:34 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-13-2018, 04:02 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-12-2018, 10:03 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-13-2018, 09:37 AM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-13-2018, 11:38 AM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-13-2018, 06:40 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-14-2018, 10:01 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-15-2018, 12:33 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-15-2018, 07:36 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-16-2018, 08:57 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-15-2018 08:37 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-13-2018, 10:35 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-14-2018, 10:15 PM
RE: (41) Bulk Cylindrical Tank - Dieter - 10-15-2018, 07:06 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-17-2018, 11:33 PM
RE: (41) Bulk Cylindrical Tank - rprosperi - 10-18-2018, 01:11 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-18-2018, 01:19 PM
RE: (41) Bulk Cylindrical Tank - SlideRule - 10-26-2018, 01:00 AM



User(s) browsing this thread: 1 Guest(s)