Post Reply 
41CL Maximum registers for DATA/PROGS storage
07-20-2018, 11:01 AM (This post was last modified: 07-20-2018 11:23 AM by Sylvain Cote.)
Post: #7
RE: 41CL Maximum registers for DATA/PROGS storage
(07-20-2018 07:25 AM)CY-CL Wrote:  With this setup after MMUEN the CL hangs!
(07-20-2018 07:36 AM)CY-CL Wrote:  The problem is, the RAM-820 has no content. When you copy a WW Container to the RAM Page 820, your setup works! Then you can change the name by INITPG, how you described it in your 2nd step “Setup simulated W&W RAMBox RAM at page 10”.

Hello Patrik,

You are right, I forgot to clear up the RAM page before activating it, sorry about that.
Unfortunately there is no RAM clear in the YFNZ module and YMCLR from YFNX will initialize it with FFF which is not good for us, I will need to do more searching for the real solution.
In the mean time I will modify the instructions to copy a module into the targeted RAM area as a place holder, that will allow us to activate the MMU and not crashing, then the INITPG will reformat it correctly.

Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 41CL Maximum registers for DATA/PROGS storage - Sylvain Cote - 07-20-2018 11:01 AM



User(s) browsing this thread: 1 Guest(s)