Search
Member List
Calendar
Help
HP Forums
/
Not HP Calculators
/
Not quite HP Calculators - but related 
/
Porting the NumWorks firmware to the HP Prime
/
Porting the NumWorks firmware to the HP Prime
|
Porting the NumWorks firmware to the HP Prime
|
|
06-13-2018, 06:03 PM
Post: #3
|
|||
|
|||
|
RE: Porting the NumWorks firmware to the HP Prime
Got the brightness control, LEDs and right parentheses insertion done. I'm running out of easy stuff to do...
Also, update 1.6.0 makes the fully-featured firmware grow to 988 KiB, very close to the 1 MiB limit of PRIME_OS.ROM. I can sidestep this with my GDB stub over the UART, but we'll need a solution for mere mortals soon... I have a GitHub issue to track my progress here: https://github.com/boricj/epsilon/issues/1 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Porting the NumWorks firmware to the HP Prime - Jean-Baptiste Boric - 06-05-2018, 04:03 PM
RE: Porting the NumWorks firmware to the HP Prime - tcab - 06-06-2018, 12:42 PM
RE: Porting the NumWorks firmware to the HP Prime - Jean-Baptiste Boric - 06-13-2018 06:03 PM
RE: Porting the NumWorks firmware to the HP Prime - pier4r - 06-13-2018, 06:22 PM
RE: Porting the NumWorks firmware to the HP Prime - Jean-Baptiste Boric - 06-13-2018, 07:36 PM
RE: Porting the NumWorks firmware to the HP Prime - eried - 06-15-2018, 09:57 PM
RE: Porting the NumWorks firmware to the HP Prime - Claudio L. - 06-29-2018, 01:59 PM
RE: Porting the NumWorks firmware to the HP Prime - compsystems - 06-16-2018, 02:32 AM
|
User(s) browsing this thread: 2 Guest(s)