Post Reply 
I have been very naughty
07-20-2017, 06:14 PM (This post was last modified: 07-20-2017 06:27 PM by Dieter.)
Post: #21
RE: I have been very naughty
(07-19-2017 10:20 PM)rprosperi Wrote:  Thanks. I didn't recall (if I even ever knew) that the 59 had so much more memory than the 58, I thought the Card Reader was the only difference.

The TI-59 has twice the memory of the 58: the default configuration is 480 steps and 60 data registers, while the 58 can be set to 480 steps or 60 registers.

(07-19-2017 10:20 PM)rprosperi Wrote:  So, the good news is I won't be typing in 640 steps... the bad news is I have to use the shoddy ROM routine.

What's wrong with the ML-02 program? Since it does not occupy any RAM all memory is available for storing the matrix and even a TI-58 can handle a 6th order equation system. On a physical TI-59 (!) even the optimized 640 step version would leave merely 40 registers.

(07-19-2017 10:20 PM)rprosperi Wrote:  I'll get over it, but was thinking poking in those 640 steps would help teach me the keyboard....

Take a look at the already mentioned Master Library Survival Guide. There are lots of other programs you can try. OK, except ML-02 and 19. ;-)

Dieter
Find all posts by this user
Quote this message in a reply
07-21-2017, 01:32 AM
Post: #22
RE: I have been very naughty
(07-20-2017 06:14 PM)Dieter Wrote:  
(07-19-2017 10:20 PM)rprosperi Wrote:  Thanks. I didn't recall (if I even ever knew) that the 59 had so much more memory than the 58, I thought the Card Reader was the only difference.

The TI-59 has twice the memory of the 58: the default configuration is 480 steps and 60 data registers, while the 58 can be set to 480 steps or 60 registers.

(07-19-2017 10:20 PM)rprosperi Wrote:  So, the good news is I won't be typing in 640 steps... the bad news is I have to use the shoddy ROM routine.

What's wrong with the ML-02 program? Since it does not occupy any RAM all memory is available for storing the matrix and even a TI-58 can handle a 6th order equation system. On a physical TI-59 (!) even the optimized 640 step version would leave merely 40 registers.

(07-19-2017 10:20 PM)rprosperi Wrote:  I'll get over it, but was thinking poking in those 640 steps would help teach me the keyboard....

Take a look at the already mentioned Master Library Survival Guide. There are lots of other programs you can try. OK, except ML-02 and 19. ;-)

Dieter

The AND vs. OR for program steps vs. storage registers is probably why I was confused about memory sizes. That and 40 years.

I was kidding about the 'shoddy' ROM routine. While there clearly was room for optimization, I'd guess that studying the ROM code will be easier, as although less optimized, it's probably more straightforward. I am always confused trying to follow Algebraic programs; after 40 years of RPN, my brain just doesn't work that way. I am always wondering where intermediate results are left, etc.

I have the Master Survival Guide, plus ROM manuals (and ROMs) for the Master Library and Math/Utilities ROM manual (and ROM) so lots of examples to choose from.

Thanks

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
07-21-2017, 01:58 AM
Post: #23
RE: I have been very naughty
Be sure to set your 58C up for the extra program steps per my earlier post.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)