INPUT Question...
03-07-2014, 01:44 AM
Post: #1
 churichuro Junior Member Posts: 34 Joined: Feb 2014
INPUT Question...
Hi

command INPUT use only one column for input values

or exist some procedure for do multiple inputs columns

just like in the FINANCE application ?

thanks.
03-07-2014, 03:19 AM
Post: #2
 cdodds Junior Member Posts: 30 Joined: Dec 2013
RE: INPUT Question...
The built in Help in the calculator is quite informative.

CD Dodds
03-07-2014, 04:30 AM
Post: #3
 cdodds Junior Member Posts: 30 Joined: Dec 2013
RE: INPUT Question...
INPUT({g1,g2,VPI,VPIE,LENGTH,INT,SSTA}, //variables used
"Verticle Curves", //Title
{" % Grade In "," % Grade Out "," VPI Sta "," VPI Elev"," Length"," Sta Interval","Special Station"}, //Lables for input

{"% Grade In","% Grade Out","VPI Sta","VPI Elev","Length of Curve"," Sta Interval","Enter '0' to Calculate full curve at intervals"}, //Help text to be displayed at bottom of screen

{g1,g2,VPI,VPIE,LENGTH,INT,0}); //Default values for variables, in this case it is whatever is already stored in those variables

Here is where you can find my program to calculate vertical curves:
http://www.hpmuseum.org/forum/thread-73.html

Scroll to the bottom for the latest version.

Hope this helps

CD Dodds
03-07-2014, 09:09 PM
Post: #4
 churichuro Junior Member Posts: 34 Joined: Feb 2014
RE: INPUT Question...
(03-07-2014 03:19 AM)cdodds Wrote:  The built in Help in the calculator is quite informative.

Thanks cdodds, but you did not understand.
I look for undocumented features of the input command.

more like INFORM command in HP50-48-49

may not believe it but I can read the manual for the HP PRIME

on FINANCE application a form input with 2 columns is used, not only one column like in the INPUT command.

seems that the calculator has many features that are not documented.
03-07-2014, 09:21 PM
Post: #5
 Tim Wessman Senior Member Posts: 2,280 Joined: Dec 2013
RE: INPUT Question...
(03-07-2014 09:09 PM)churichuro Wrote:  more like INFORM command in HP50-48-49

You do not have that level of control with the current version. That does not mean it will not change in a future one however.

TW

Although I work for HP, the views and opinions I post here are my own.
03-07-2014, 11:19 PM
Post: #6
 churichuro Junior Member Posts: 34 Joined: Feb 2014
RE: INPUT Question...
(03-07-2014 09:21 PM)Tim Wessman Wrote:
(03-07-2014 09:09 PM)churichuro Wrote:  more like INFORM command in HP50-48-49

You do not have that level of control with the current version. That does not mean it will not change in a future one however.

YES!!! I'm sure about it! thanks Tim.
 « Next Oldest | Next Newest »

User(s) browsing this thread: 1 Guest(s)