Poll: What name should we use?
This poll is closed.
34S+ 29.41% 15 29.41%
34Sii 49.02% 25 49.02%
34P 1.96% 1 1.96%
35P 0% 0 0%
36P 0% 0 0%
36S 17.65% 9 17.65%
something else entirely (comment below) 1.96% 1 1.96%
Total 51 votes 100%
* You voted for this item. [Show Results]

Post Reply 
Looking for a name
04-12-2016, 08:07 AM
Post: #1
Looking for a name
We're busy behind the scenes thinking about the successor to the WP 34S. Unfortunately, it isn't going to be the WP 43S we've dreamed about, the three of us are very busy with real life and work and aren't going to get time to do the 43S justice soon. Rather, it will be a more modest extension of the 34S's capabilities. The device is envisaged to have:
  • The 43S menu system (or similar)
  • Simultaneous display of multiple stack levels (we're looking at four but no promises)
  • A status row showing all mode settings
  • The UNDO feature from the 31S

The first stumbling block is the name for this device. So to the forums for the answer. Please choose one of the following options or suggest an alternative...
Find all posts by this user
Quote this message in a reply
04-12-2016, 08:38 AM
Post: #2
RE: Looking for a name
(04-12-2016 08:07 AM)Paul Dale Wrote:  [*]Simultaneous display of multiple stack levels (we're looking at four but no promises)

If there are only two rows an xy<>zt button would be nice.

Bernhard

That's one small step for a man - one giant leap for mankind.
Find all posts by this user
Quote this message in a reply
04-12-2016, 09:07 AM
Post: #3
RE: Looking for a name
(04-12-2016 08:38 AM)PANAMATIK Wrote:  If there are only two rows an xy<>zt button would be nice.

The 34S has CPX x<>y already -- two key presses gives the function you want. There is no way this is going to be reduced. Unshifted keys are always at a premium.


Pauli
Find all posts by this user
Quote this message in a reply
04-12-2016, 10:50 AM
Post: #4
RE: Looking for a name
Hi, Pauli,
Is the hardware donor chosen already?

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
04-12-2016, 11:35 AM
Post: #5
RE: Looking for a name
(04-12-2016 10:50 AM)jebem Wrote:  Hi, Pauli,
Is the hardware donor chosen already?
+1
Find all posts by this user
Quote this message in a reply
04-12-2016, 12:34 PM
Post: #6
RE: Looking for a name
Yes, the name depends also on the hardware.

Jean-Charles
Find all posts by this user
Quote this message in a reply
04-12-2016, 12:49 PM
Post: #7
RE: Looking for a name
(04-12-2016 11:35 AM)Marcio Wrote:  
(04-12-2016 10:50 AM)jebem Wrote:  Hi, Pauli,
Is the hardware donor chosen already?
+1

Oops, I was assuming a new hardware platform will be used here.
This is really bad.

So, to rephrase the question:
Will the new features be available on a new hardware platform, or will it be just an software edition for selected computer platforms/OS?

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
04-12-2016, 03:45 PM
Post: #8
RE: Looking for a name
WP 34S Limited Edition Excella Magnum+ Omni-CALC 10000 Xiiii PREMIUM Series II

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
04-12-2016, 04:44 PM
Post: #9
RE: Looking for a name
(04-12-2016 12:49 PM)jebem Wrote:  Oops, I was assuming a new hardware platform will be used here.

So was I. Not only assuming but also hoping.
Find all posts by this user
Quote this message in a reply
04-12-2016, 07:10 PM
Post: #10
RE: Looking for a name
What is P standing for?
Find all posts by this user
Quote this message in a reply
04-12-2016, 08:45 PM
Post: #11
RE: Looking for a name
(04-12-2016 03:45 PM)TASP Wrote:  WP 34S Limited Edition Excella Magnum+ Omni-CALC 10000 Xiiii PREMIUM Series II

You left out "Turbo". Smile
Find all posts by this user
Quote this message in a reply
04-12-2016, 09:03 PM
Post: #12
RE: Looking for a name
(04-12-2016 07:10 PM)Thomas Radtke Wrote:  What is P standing for?

Performance ?
Find all posts by this user
Quote this message in a reply
04-12-2016, 09:12 PM
Post: #13
RE: Looking for a name
\(\omega \rho ^{3}\) MkII

So everybody gets credit... Wink

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
04-12-2016, 09:14 PM
Post: #14
RE: Looking for a name
(04-12-2016 08:45 PM)Dave Frederickson Wrote:  
(04-12-2016 03:45 PM)TASP Wrote:  WP 34S Limited Edition Excella Magnum+ Omni-CALC 10000 Xiiii PREMIUM Series II

You left out "Turbo". Smile

So I did.

Thank you.

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
04-13-2016, 02:11 AM
Post: #15
RE: Looking for a name
(04-12-2016 07:10 PM)Thomas Radtke Wrote:  What is P standing for?

Programmable was my thought but the P models (okay all bar one) came from Walter so it will need confirmation off the forums.


- Pauli
Find all posts by this user
Quote this message in a reply
04-13-2016, 02:19 AM
Post: #16
RE: Looking for a name
(04-12-2016 10:50 AM)jebem Wrote:  Is the hardware donor chosen already?

I don't think I can say too much here at the moment. We won't be using a donor for this. The possible donors are either too resource limited or physically large. We are investigating hardware possibilities.


- Pauli
Find all posts by this user
Quote this message in a reply
04-13-2016, 03:15 AM
Post: #17
RE: Looking for a name
Just to note that 34Sii is probably going to be easier to search for than 34S+
Find all posts by this user
Quote this message in a reply
04-13-2016, 06:47 AM
Post: #18
RE: Looking for a name
Αντικύθηρα (Antikythera) Pro?
Find all posts by this user
Quote this message in a reply
04-13-2016, 09:44 AM (This post was last modified: 04-13-2016 09:44 AM by Ángel Martin.)
Post: #19
RE: Looking for a name
(04-12-2016 09:14 PM)TASP Wrote:  
(04-12-2016 08:45 PM)Dave Frederickson Wrote:  You left out "Turbo". Smile

So I did.

Thank you.

"Deluxe, Ultimate Unleaded" come to mind...

Cheers,

"To live or die by your own sword one must first learn to wield it aptly."
Find all posts by this user
Quote this message in a reply
04-17-2016, 09:35 PM
Post: #20
RE: Looking for a name
Looks like we've got a clear winner here: 34SII.

I was incorrect, the P stood for Portrait.


Pauli
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)