Post Reply 
HP-25C Eumulator
01-14-2015, 12:45 PM
Post: #161
RE: HP-25C Eumulator
(01-14-2015 03:52 AM)John R Wrote:  Hi Chris,

I got mine in the mail today. It is even nicer than I imagined -- worth every penny (and more)!

Thanks so much for the time and effort you have put into this, and for making it available to all of us.

Cheers,
John

Glad you enjoy it. I enjoy working on this project as well.

(01-14-2015 06:06 AM)iceman Wrote:  Hi Chris,

Got it yesterday. Built it today, very nice kit. Mounted bubbles at 20 degrees as suggested in HP data sheet. Used machine tool sockets.

Thank-you very much Chris.

(Pictures in email)

You did a better build than most of my units! Especially like your retro "red" ic sockets. I do prefer to have LEDs mounted flat and the fact that the LEDs allows for incline also make them difficult to align. Did you friction fit them on different inclinations before fixing them? Is there a lot of differences w/ the angles? Honestly I did not plan attention to this before.

Would you mind if I paste your photos so all can enjoy? (no answer in 24 hrs means yes Smile)

V3 3rd batch list expect shipping late January
rposperi x3, Marcus (k), Geoff, jebem (k), walter, Den, RMollov, Herman (k), jebem (k) (11 units)

V3 4th batch list expect shpping mid Feburary
algorhythm x2 (k), pcfu44, Bernd, Graig (5 units)
Find all posts by this user
Quote this message in a reply
01-14-2015, 02:15 PM
Post: #162
RE: HP-25C Eumulator
Hi Chris,
(01-14-2015 12:45 PM)Chris Chung Wrote:  V3 4th batch list expect shpping mid Feburary
algorhythm x2 (k), pcfu44, Bernd, Graig (5 units)
Thanks for putting me on the list.
When do you exspect the payment?

Regards
Bernd
Find all posts by this user
Quote this message in a reply
01-14-2015, 04:18 PM
Post: #163
RE: HP-25C Eumulator
(01-14-2015 12:45 PM)Chris Chung Wrote:  V3 3rd batch list expect shipping late January
rposperi x3, Marcus (k), Geoff, jebem (k), walter, Den, RMollov, Herman (k), jebem (k) (11 units)

V3 4th batch list expect shpping mid Feburary
algorhythm x2 (k), pcfu44, Bernd, Graig (5 units)

Hi, Chris,
I'm "jebem" and I'm on your list for only one unit in kit form, please!

The above list lists my name twice and one of it with 11 units !
I believe there was some error when copying the previous list order from the previous posts.
Thanks!

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
01-14-2015, 06:28 PM (This post was last modified: 01-14-2015 06:39 PM by iceman.)
Post: #164
RE: HP-25C Eumulator
Quote:Would you mind if I paste your photos so all can enjoy?

Hi Chris,

Please go ahead, I would have posted them myself, but there was no room in my account.

Also, I may have missed it, but could you please post the default program that the calculator ships with for 25C and 33C?

Is it the same for both e.g. arcsin(arccos(arctan(tan(cos(sin(9­))))))?

Quote:Did you friction fit them on different inclinations before fixing them? Is there a lot of differences w/ the angles? Honestly I did not plan attention to this before.

Yes, I friction fit and tried different angles. For table top use and with the calculator flat, you may wish to have 30 degrees. If the ICs are socketed, the calculator is sloped, so 20 degrees seems to work well. For handheld use, zero degrees might be best as the keyboard is so compact.

Cheers,
Find all posts by this user
Quote this message in a reply
01-14-2015, 07:52 PM
Post: #165
RE: HP-25C Eumulator
(01-14-2015 06:28 PM)iceman Wrote:  
Quote:Would you mind if I paste your photos so all can enjoy?

Hi Chris,

Please go ahead, I would have posted them myself, but there was no room in my account.

Also, I may have missed it, but could you please post the default program that the calculator ships with for 25C and 33C?

Is it the same for both e.g. arcsin(arccos(arctan(tan(cos(sin(9­))))))?

Yes I believe it's also called the forensic test. There was a web site I recall lists the result for many calculators.

Iceman's build....

           
Find all posts by this user
Quote this message in a reply
01-15-2015, 12:53 PM
Post: #166
RE: HP-25C Eumulator
(01-14-2015 04:18 PM)jebem Wrote:  
(01-14-2015 12:45 PM)Chris Chung Wrote:  V3 3rd batch list expect shipping late January
rposperi x3, Marcus (k), Geoff, jebem (k), walter, Den, RMollov, Herman (k), jebem (k) (11 units)

V3 4th batch list expect shpping mid Feburary
algorhythm x2 (k), pcfu44, Bernd, Graig (5 units)

Hi, Chris,
I'm "jebem" and I'm on your list for only one unit in kit form, please!

The above list lists my name twice and one of it with 11 units !
I believe there was some error when copying the previous list order from the previous posts.
Thanks!

Thanks for the correction! It is sometimes difficult to track.

V3 3rd batch list expect shipping late January
rposperi x3, Marcus (k), Geoff, jebem (k), walter, Den, RMollov, Herman (k), algorhythm x2 (k) (12 units)

V3 4th batch list expect shipping mid February
pcfu44, Bernd, Graig, c_d (4 units)
Find all posts by this user
Quote this message in a reply
01-16-2015, 06:19 AM
Post: #167
RE: HP-25C Eumulator
Chris:

I'm interested in 1 assembled unit. Thanks!
Find all posts by this user
Quote this message in a reply
01-17-2015, 10:46 AM (This post was last modified: 01-17-2015 12:39 PM by Didier Lachieze.)
Post: #168
RE: HP-25C Eumulator
I've assembled today my NP 25 kit. Thanks to the detailed instructions from Chris everything went well.
Here are a few pictures:

[Image: a0nfi3] [Image: a0nfi5] [Image: a0nfhs]
[Image: a0nfhu] [Image: a0nfhw] [Image: a0nfhz]
[Image: a0nfhl] [Image: a0nfhn]

I've entered the Moon Landing Program for the HP 25 and it works well.

However I've noted something strange: the BST function doesn't seem to work, when in program mode pressing BST doesn't move one step back. it doesn't seem to be an issue with the physical button switch as for ex. f SCI 3 works in non program mode and is correctly registered in program mode.
EDIT: don't mind, it was switched to HP 33 emulation ... Switching back to HP 25 everything is OK.
Find all posts by this user
Quote this message in a reply
01-17-2015, 10:56 AM
Post: #169
RE: HP-25C Eumulator
Merci bien pour cette documentation illustrée!

BTW, I notice the board saying "woodstock / spice microcode emulation". Now - where's the spice? What did I overlook?

d:-?
Find all posts by this user
Quote this message in a reply
01-17-2015, 11:20 AM
Post: #170
RE: HP-25C Eumulator
(01-17-2015 10:56 AM)walter b Wrote:  BTW, I notice the board saying "woodstock / spice microcode emulation". Now - where's the spice? What did I overlook?

Walter, with a quick keycode during startup, you can be a Spice (HP-33, specifically).

-- Sanjeev Visvanatha
Find all posts by this user
Quote this message in a reply
01-17-2015, 11:51 AM
Post: #171
RE: HP-25C Eumulator
Walter, you can choose the emulated calculator at startup:

Quote:Start-up choice (press a button while turning power on) are as follows.
press-n-hold 'g' for hp33C
press-n-hold 'E+' for hp25C
press-n-hold 'CLS' for hp21

(See all startup choice details in this post)
Find all posts by this user
Quote this message in a reply
01-17-2015, 02:45 PM
Post: #172
RE: HP-25C Eumulator
(01-17-2015 11:20 AM)Sanjeev Visvanatha Wrote:  Walter, with a quick keycode during startup, you can be a Spice (HP-33, specifically).

Gosh, that's frightening! I don't really want to be a Spice Wink

d:-)
Find all posts by this user
Quote this message in a reply
01-17-2015, 04:24 PM
Post: #173
RE: HP-25C Eumulator
(01-17-2015 02:45 PM)walter b Wrote:  
(01-17-2015 11:20 AM)Sanjeev Visvanatha Wrote:  Walter, with a quick keycode during startup, you can be a Spice (HP-33, specifically).

Gosh, that's frightening! I don't really want to be a Spice Wink

d:-)

Too late...

[Image: mild_cut_site.png]

Mildly spiced.

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
01-17-2015, 09:29 PM
Post: #174
RE: HP-25C Eumulator
(01-17-2015 04:24 PM)Massimo Gnerucci Wrote:  Too late...

I always feared I'd come to a bad end.

d;-)
Find all posts by this user
Quote this message in a reply
01-18-2015, 01:23 AM (This post was last modified: 01-18-2015 01:43 AM by Chris Chung.)
Post: #175
RE: HP-25C Eumulator
(01-17-2015 10:46 AM)Didier Lachieze Wrote:  However I've noted something strange: the BST function doesn't seem to work, when in program mode pressing BST doesn't move one step back. it doesn't seem to be an issue with the physical button switch as for ex. f SCI 3 works in non program mode and is correctly registered in program mode.
EDIT: don't mind, it was switched to HP 33 emulation ... Switching back to HP 25 everything is OK.

Very nice build and well equipped to do the job. A pair of tweeters helps in a lot of places.

Yes, that confuses me initially as well. Found out the HP-33's back step is shift (G) + SST. The PCB silkscreen is for HP-25 so it doesn't play well when you are in HP-33 or HP-21 emulation.

@walter
Here is the video that shows the various start-up modes

V3 3rd batch list expect shipping late January
rposperi x3, Marcus (k), Geoff, jebem (k), walter, Den, RMollov, Herman (k), algorhythm x2 (k) (12 units)

V3 4th batch list expect shipping mid February
pcfu44, Bernd, Graig, c_d, DMaier, olr (6 units)

EDIT A few member PMed and ask for payment instructions.
I will send out common instructions to everybody when the units are almost ready, (i.e. all parts and PCBs arrived), and I would wait 2/3 days for the payment and for your shipping addresses (and also allow time for myself to do the assembly). My paypal account is associated w/ an gmail account and that's all one needs to send money. This worked well for the last 2/3 batches.
A kit will cost you US$30, assembled unit is US$40. Shipping is $3 for Canada, $5 for US and $8 for rest of the world. Only 2 units / kits per shipping packet. I.e. For 3 units / kits you have to pay 2 x shipping. This is the constraint of the cheaper postage (called light packet) I am using.
Find all posts by this user
Quote this message in a reply
01-18-2015, 09:38 AM
Post: #176
RE: HP-25C Eumulator
If Walter agrees you can send mine and his in a single packet. We live only a few km apart. If you send it to me I would have an assembled reference for my kit.

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
01-18-2015, 09:44 AM
Post: #177
RE: HP-25C Eumulator
What confused me at the beginning was that the ROM selection at startup with ON + g (33) or E+(25) is temporary and the next time you'll switch on the NP 25 it will load the default ROM selected by ON + PGM/RUN.
Find all posts by this user
Quote this message in a reply
01-18-2015, 06:59 PM (This post was last modified: 01-19-2015 08:42 PM by jebem.)
Post: #178
RE: HP-25C Eumulator
NP-25 User Guide


Hi, Chris,
I hope you are alright when I post a summary of your excellent information about this project as a "NP-25 User Guide".
If this is an issue for you or others involved in this project, I apologize and I will remove it right away.

EDIT:
Draft Version 0.1 have just come out now incorporating the suggested corrections by some of the MoHPC members.
Please keep reading the next posts to find out this new version.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
01-18-2015, 07:58 PM
Post: #179
RE: HP-25C Eumulator
Excellent work Jose, thank you very much

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
01-18-2015, 08:21 PM
Post: #180
RE: HP-25C Eumulator
Muito obrigado, Jose! Very good photographs as well.

Little nitpicky remarks for the next edition:
  • It's called Nonpareil, not Nonpariel (please change all).
  • What's sometimes called E+ is in fact Σ+. You can copy it from here. Just saw it's on the pcb, too, which doesn't make it any better - pcb print may have featured only a very limited set of letters though.

d:-)
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 3 Guest(s)