Post Reply 
NumWorks firmware version 13/ß14 2020
03-28-2020, 06:50 PM (This post was last modified: 06-03-2020 02:49 AM by compsystems.)
Post: #1
NumWorks firmware version 13/ß14 2020
version 13.x More info

https://tiplanet.org/forum/viewtopic.php...32#p252132
Find all posts by this user
Quote this message in a reply
03-28-2020, 07:27 PM
Post: #2
RE: NumWorks firmware version 13.1 March 2020
(03-28-2020 06:50 PM)compsystems Wrote:  More info

https://tiplanet.org/forum/viewtopic.php...32#p252132

They finally fixed the Python input command. Yay!

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
03-30-2020, 05:43 PM
Post: #3
RE: NumWorks firmware version 13.1 March 2020
(03-28-2020 07:27 PM)toml_12953 Wrote:  They finally fixed the Python input command. Yay!

Tom, what was the problem with the input command?
Find all posts by this user
Quote this message in a reply
03-31-2020, 02:06 AM
Post: #4
RE: NumWorks firmware version 13.1 March 2020
(03-30-2020 05:43 PM)Don Shepherd Wrote:  
(03-28-2020 07:27 PM)toml_12953 Wrote:  They finally fixed the Python input command. Yay!

Tom, what was the problem with the input command?

Here's an example:

>>> a=input('x? ')
x? 62
>>>print(a)
666put('x? ')

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
03-31-2020, 08:34 AM
Post: #5
RE: NumWorks firmware version 13.1 March 2020
Number of the Beast

Everything will be alright in the end. If it's not alright, then it's not the end.
Find all posts by this user
Quote this message in a reply
04-01-2020, 04:01 PM
Post: #6
RE: NumWorks firmware version 13.1 March 2020
13.2
Mathplotlib https://tiplanet.org/forum/viewtopic.php...ba#p252187
Find all posts by this user
Quote this message in a reply
04-01-2020, 09:21 PM
Post: #7
RE: NumWorks firmware version 13.1 March 2020
(03-31-2020 02:06 AM)toml_12953 Wrote:  
(03-30-2020 05:43 PM)Don Shepherd Wrote:  Tom, what was the problem with the input command?

Here's an example:

>>> a=input('x? ')
x? 62
>>>print(a)
666put('x? ')
Thanks Tom. I just received my Numworks calc today and have been playing with it. Entering:

a=input('x? ')
62
print(a)

directly into the Python shell on the calc was a frustrating experience, trying to do shift lock as required and not finding the single quote on the keyboard at all (I found it under the toolbox key). I can now see the value of writing Python scripts on the computer (Chromebook in my case) and uploading. And I see the output 62 instead of the 666 stuff.

Thanks for the info you provided. I'm looking forward to learning both Python and the Numworks calculator.
Find all posts by this user
Quote this message in a reply
04-02-2020, 02:42 AM
Post: #8
RE: NumWorks firmware version 13.1 March 2020
(04-01-2020 04:01 PM)compsystems Wrote:  13.2
Mathplotlib https://tiplanet.org/forum/viewtopic.php...ba#p252187

Yes! A great release that also gives more memory for Python.

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
06-03-2020, 02:48 AM (This post was last modified: 06-03-2020 02:36 PM by compsystems.)
Post: #9
RE: NumWorks firmware version 13.1 March 2020
ß14.x
https://tiplanet.org/forum/viewtopic.php...3f#p253519
[Image: image.php?mode=thumbnail&image_id=12531]
Find all posts by this user
Quote this message in a reply
06-03-2020, 06:09 AM
Post: #10
RE: NumWorks firmware version 13/ß14 2020
Picture too small: can't read a thing. Tongue

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)