Wow tried putting this program in the HP Guide:
05-19-2019, 01:51 PM
Post: #1
 tom234 Junior Member Posts: 26 Joined: Aug 2016
Wow tried putting this program in the HP Guide:
Program Listing
local x1:=160, x2:=299, x3:=21 local y1:=0, y2:=240, y3:=240 local xn:=160, yn:=0;
local a, b, color;
EXPORT Sierpinski()
BEGIN
RECT();
FOR a FROM 1 TO 10000 STEP 1 DO
b:=RANDINT(2)+1;
CASE
IF b=1 THEN xn:=(xn+x1)/2; yn:=(yn+y1)/2;END; IF b=2 THEN xn:=(xn+x2)/2; yn:=(yn+y2)/2;END; IF b=3 THEN xn:=(xn+x3)/2; yn:=(yn+y3)/2;END; END;
color:=RGB(255-a/40,0,a/40); PIXON_P(IP(xn),IP(yn),color); END;
WAIT;
END;

/////

Well, it didn't work couldn't get by line 2 with an error code?
05-19-2019, 02:21 PM
Post: #2
 Wes Loewer Member Posts: 142 Joined: Jan 2014
RE: Wow tried putting this program in the HP Guide:
Line 2 is missing semicolons before the LOCAL keywords;

Code:
local x1:=160, x2:=299, x3:=21; local y1:=0, y2:=240, y3:=240; local xn:=160, yn:=0;

or more aesthetically pleasing
Code:
local x1:=160, x2:=299, x3:=21; local y1:=0, y2:=240, y3:=240; local xn:=160, yn:=0;

Or just put all 8 variables in one LOCAL declaration.
Code:
local x1:=160, x2:=299, x3:=21, y1:=0, y2:=240, y3:=240, xn:=160, yn:=0;

Eight is the max though. If you have more than eight, you have to split them into separate LOCAL statements.

I couldn't find this program in the User Guide. What page is it on?
05-19-2019, 02:42 PM
Post: #3
 DrD Senior Member Posts: 1,082 Joined: Feb 2014
RE: Wow tried putting this program in the HP Guide:
Code:
 local x1:=160, x2:=299, x3:=21; local y1:=0, y2:=240, y3:=240; local xn:=160, yn:=0; local a, b, color; EXPORT Sierpinski() BEGIN   RECT();   FOR a FROM 1 TO 10000 STEP 1 DO     b:=RANDINT(2)+1;    CASE      IF b=1 THEN xn:=(xn+x1)/2; yn:=(yn+y1)/2;END;      IF b=2 THEN xn:=(xn+x2)/2; yn:=(yn+y2)/2;END;      IF b=3 THEN xn:=(xn+x3)/2; yn:=(yn+y3)/2;END;    END;     color:=RGB(255-a/40,0,a/40);    PIXON_P(IP(xn),IP(yn),color);   END;   WAIT; END;
05-19-2019, 02:57 PM
Post: #4
 DrD Senior Member Posts: 1,082 Joined: Feb 2014
RE: Wow tried putting this program in the HP Guide:

Code:
 local x1:=160, x2:=299, x3:=21; local y1:=0, y2:=240, y3:=240; local xn:=160, yn:=0; local a, b, color; EXPORT Sierpinski() BEGIN   RECT();   FOR N FROM 1 TO 10 DO     FOR a FROM 1 TO 10000 STEP 1 DO       b:=RANDINT(2)+1;      CASE        IF b=1 THEN xn:=(xn+x1)/2; yn:=(yn+y1)/2;END;        IF b=2 THEN xn:=(xn+x2)/2; yn:=(yn+y2)/2;END;        IF b=3 THEN xn:=(xn+x3)/2; yn:=(yn+y3)/2;END;      END;       color:=RGB(255-a/40,0,a/40);      PIXON_P(IP(xn),IP(yn),color);     END;     WAIT(2);   END;   END;
05-19-2019, 04:44 PM
Post: #5
 tom234 Junior Member Posts: 26 Joined: Aug 2016
RE: Wow tried putting this program in the HP Guide:
(05-19-2019 02:57 PM)DrD Wrote:  How about 10 of them?

Code:
 local x1:=160, x2:=299, x3:=21; local y1:=0, y2:=240, y3:=240; local xn:=160, yn:=0; local a, b, color; EXPORT Sierpinski() BEGIN   RECT();   FOR N FROM 1 TO 10 DO     FOR a FROM 1 TO 10000 STEP 1 DO       b:=RANDINT(2)+1;      CASE        IF b=1 THEN xn:=(xn+x1)/2; yn:=(yn+y1)/2;END;        IF b=2 THEN xn:=(xn+x2)/2; yn:=(yn+y2)/2;END;        IF b=3 THEN xn:=(xn+x3)/2; yn:=(yn+y3)/2;END;      END;       color:=RGB(255-a/40,0,a/40);      PIXON_P(IP(xn),IP(yn),color);     END;     WAIT(2);   END;   END;

/////
It works thank you know I know it's me.
05-20-2019, 04:43 AM
Post: #6
 cyrille de brébisson Senior Member Posts: 853 Joined: Dec 2013
RE: Wow tried putting this program in the HP Guide:
Hello,

export Sier2()
begin
rect;
local a=#0;
while a<#160 do
local b= #0;
while b<#160 do
pixon_p(a and b, a or b, 0);
b:= b+#1;
end;
a:= a+#1;
end;
freeze;
end;

Cyrille

Although I work for the HP calculator group, the views and opinions I post here are my own. I do not speak for HP.
 « Next Oldest | Next Newest »

User(s) browsing this thread: 1 Guest(s)