+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: General Forum (/forum-4.html)
+--- Thread: 3D printer in Europa (/thread-21439.html)
3D printer in Europa - PeterP - 03-11-2024 07:28 PM
Hi, I want to 3D print some of the HP-IL parts following Martin H‘s excellent descriptions and his generously shared stl files.
Given that a lot had changed in the last 10 years, I was wondering if anyone has made good experiences with 3d printing services in Germany or Europa, potentially especially for the HP-IL cables and connector pieces, but also for module housings (though I dont think we have stl files for them)
RE: 3D printer in Europa - KeithB - 03-11-2024 08:04 PM
In the US, at least, you can look for a local Maker shop. Here in my locality in Downey, CA, the city library has a 3D printer for the public's use!
RE: 3D printer in Europa - Karel - 03-11-2024 10:33 PM
Peter,
I am in Czech Republic. I can print whatever you send me stl of.
No problem at all
Karel
RE: 3D printer in Europa - Diego Diaz - 03-12-2024 12:50 PM
Hi Peter, all,
Quite a long while ago I designed a 3D model of the HP-41 module shell based on the CMT type.
It's built using sketchup, and you can find it at msg. #7 in this thread... from 2013! (tempus fugit)
https://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv021.cgi?read=243582
It was not intended for production, just a 3D modeling exercise. These shells don't have much use without the corresponding connectors, which are the real problem...
Here you are the links to the .SKP and .STL files.
https://drive.google.com/file/d/1xrL-yomhqk3rDk5s8IFztVvgugxBEpDx/view?usp=drive_link
https://drive.google.com/file/d/1lgT7sHsRfujcm_cHbPZouynjV8RLz_52/view?usp=drive_link
Hope you find this useful.
All the best from the Caribbean.
Diego.
Edit: The links were restricted (sorry), they're are now available.
RE: 3D printer in Europa - pilou45000 - 03-12-2024 05:40 PM
Hi !
I build my own HP-IL cables and they’re working fine !
3D printing parts : https://www.fama3d.com/it/
Connector :
https://www.mouser.fr/ProductDetail/ITT-Cannon/031-9540-000?qs=aoWmGRshpy6N3nlogAFbpg%3D%3D&countryCode=DE¤cyCode=EUR
https://eu.mouser.com/ProductDetail/ITT-Cannon/030-9542-001?qs=uQD7XCvsSCO9gA4pRoYIRQ%3D%3D&countryCode=DE¤cyCode=EUR
Best regards from France.
RE: 3D printer in Europa - PeterP - 03-12-2024 10:36 PM
Pilou4500, congrats on your success!
Did you use Martin’s STL files with the 3d printing service in italy you listed? What type of process and material did you use with them? No posso parlare italiano cosi bene ma forze posso usara la website nonostante!
RE: 3D printer in Europa - Divasson - 03-12-2024 10:42 PM
Hi,
We print a lot of parts for the shop, and we use Sculpteo.com in France and shapeways. Shapeways tends to be more expensive. I use HP Multijet Fusion technology. I'd say we buy 90% in Sculpteo, some 5k€ per year.
RE: 3D printer in Europa - pilou45000 - 03-13-2024 07:40 AM
(03-12-2024 10:36 PM)PeterP Wrote: Pilou4500, congrats on your success!
Did you use Martin’s STL files with the 3d printing service in italy you listed? What type of process and material did you use with them? No posso parlare italiano cosi bene ma forze posso usara la website nonostante!
Hi Peter,
For the 3D printing parts on Fama3D:
Matériel: Nylon PA12 Classic
Couleur: Noir Mat
Presse: Haut Mécanique
RE: 3D printer in Europa - floppy - 03-13-2024 10:05 AM
(03-12-2024 10:36 PM)PeterP Wrote: Pilou4500, congrats on your success!
Did you use Martin’s STL files with the 3d printing service in italy you listed? What type of process and material did you use with them? No posso parlare italiano cosi bene ma forze posso usara la website nonostante!
https://3d-print.jomatik.de/
Artikel ID: 72464
Name: HP-IL Steckverbinder
Maße: 2.0 cm x 3.6 cm x 2.2 cm
Druck: Kunststoff-Sintern, Polyamid, Weiß
Anzahl: 4
Preis: 26.00 €
RE: 3D printer in Europa - floppy - 03-13-2024 10:08 AM
(03-12-2024 05:40 PM)pilou45000 Wrote: Hi !I would be interested in buying few cables: I gave up home at the soldering because the material migrated everywhere (I have still parts: housing / connector / cable)
I build my own HP-IL cables and they’re working fine !
3D printing parts : https://www.fama3d.com/it/
Connector :
https://www.mouser.fr/ProductDetail/ITT-Cannon/031-9540-000?qs=aoWmGRshpy6N3nlogAFbpg%3D%3D&countryCode=DE¤cyCode=EUR
https://eu.mouser.com/ProductDetail/ITT-Cannon/030-9542-001?qs=uQD7XCvsSCO9gA4pRoYIRQ%3D%3D&countryCode=DE¤cyCode=EUR
Best regards from France.
RE: 3D printer in Europa - PeterP - 03-13-2024 10:37 AM
floppy, thank you but they are not for purchase available currently....
Link to 3d-print,jomatik.de HP-IL Steckverbindungen - NOTE: not a https link!
(03-13-2024 10:05 AM)floppy Wrote:(03-12-2024 10:36 PM)PeterP Wrote: Pilou4500, congrats on your success!
Did you use Martin’s STL files with the 3d printing service in italy you listed? What type of process and material did you use with them? No posso parlare italiano cosi bene ma forze posso usara la website nonostante!
https://3d-print.jomatik.de/
Artikel ID: 72464
Name: HP-IL Steckverbinder
Maße: 2.0 cm x 3.6 cm x 2.2 cm
Druck: Kunststoff-Sintern, Polyamid, Weiß
Anzahl: 4
Preis: 26.00 €
RE: 3D printer in Europa - PeterP - 03-13-2024 10:46 AM
(03-13-2024 07:40 AM)pilou45000 Wrote:(03-12-2024 10:36 PM)PeterP Wrote: Pilou4500, congrats on your success!
Did you use Martin’s STL files with the 3d printing service in italy you listed? What type of process and material did you use with them? No posso parlare italiano cosi bene ma forze posso usara la website nonostante!
Hi Peter,
For the 3D printing parts on Fama3D:
Matériel: Nylon PA12 Classic
Couleur: Noir Mat
Presse: Haut Mécanique
Wonderful, thank you for all the detail info!
RE: 3D printer in Europa - floppy - 03-13-2024 10:47 AM
(03-13-2024 10:37 AM)PeterP Wrote: floppy, thank you but they are not for purchase available currently....ups.
upload the stl at https://murtfeldt-as.de/
?
I already ordered my HP41C 3D printed box there.
RE: 3D printer in Europa - PeterP - 03-13-2024 10:48 AM
(03-12-2024 10:42 PM)Divasson Wrote: Hi,
We print a lot of parts for the shop, and we use Sculpteo.com in France and shapeways. Shapeways tends to be more expensive. I use HP Multijet Fusion technology. I'd say we buy 90% in Sculpteo, some 5k€ per year.
Divasson, thank you! I will check them out given that they are in Europe and you have such good experience with them!