Post Reply 
New FIRMWARE !
01-31-2018, 05:03 PM
Post: #21
RE: New FIRMWARE !
(01-31-2018 04:37 PM)TheKaneB Wrote:  There's also the Black-Scholes formula for option pricing, not found on the 12C.

not found in the Calc, but there is in its manual...

∫aL√0mic (IT9CLU), HP Prime 50g 41CX 71b 42s 12C 15C - DM42 WP34s :: Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
01-31-2018, 05:09 PM
Post: #22
RE: New FIRMWARE !
I was going to wait to post anything until the "update.xml" file that drives the automatic detection of updates was posted. Apparently, the old one was pulled down by the system and then the system proceeded to re-upload with a new date..... dunno. :?

The document updates are still pending as well.

TW

Although I work for the HP calculator group, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
01-31-2018, 05:18 PM (This post was last modified: 01-31-2018 05:18 PM by Carlos295pz.)
Post: #23
RE: New FIRMWARE !
(01-31-2018 05:09 PM)Tim Wessman Wrote:  I was going to wait to post anything until the "update.xml" file that drives the automatic detection of updates was posted. Apparently, the old one was pulled down by the system and then the system proceeded to re-upload with a new date..... dunno. :?

The document updates are still pending as well.

Many of us patiently await your publication Blush

Viga C | TD | FB
Visit this user's website Find all posts by this user
Quote this message in a reply
01-31-2018, 05:34 PM
Post: #24
RE: New FIRMWARE !
(01-31-2018 10:33 AM)ggauny@live.fr Wrote:  Hi,

To load you can take a look at TiPlanet.org, a french site from where you can
download.

https://tiplanet.org/forum/portal.php?&s...052789911e

I struggled to obtain this one, but I was finally able to get it all through TIPlanet. What irony to have to get a very important HP calculator update through TIPlanet!
I suppose I was a little too anxious to wait.

8-)

smp
Find all posts by this user
Quote this message in a reply
01-31-2018, 05:58 PM
Post: #25
RE: New FIRMWARE !
I think its great personally!

The fact that Prime is either the #1 or #2 recommend calculator for France and has a high level of interest on the main european TI site speaks rather highly in my mind...

You would have been prompted to get the update except the stupid system that manages the files on that site seems to be constantly thinking up new ways to mess up. Smile

TW

Although I work for the HP calculator group, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
01-31-2018, 06:02 PM (This post was last modified: 01-31-2018 06:04 PM by toml_12953.)
Post: #26
RE: New FIRMWARE !
(01-31-2018 05:34 PM)smp Wrote:  [quote='ggauny@live.fr' pid='90083' dateline='1517394836']
What irony to have to get a very important HP calculator update through TIPlanet!
smp


Oui. Bien sûr! Smile

Thanks for the link. I got the files from there with no problem.

Tom L
I think therefore I am-Descartes
I think therefore you are-Gorgias
You're not here to think-Army Sergeant
Find all posts by this user
Quote this message in a reply
01-31-2018, 07:24 PM
Post: #27
RE: New FIRMWARE ! BUG
Don't know if this happened before. On the real calculator push this sequence:
  1. APP
  2. Geometry
  3. Symb
  4. New
  5. OK
Calculator restarts. Someone else with the same experience?

It doesn't happen so with the virtual calculator.

Günter
Find all posts by this user
Quote this message in a reply
01-31-2018, 08:03 PM
Post: #28
RE: New FIRMWARE !
(01-31-2018 07:24 PM)Guenter Schink Wrote:  [*]APP
[*]Geometry
[*]Symb
[*]New
[*]OK
Calculator restarts. Someone else with the same experience?
Me too. Also on virtual calculator.
Find all posts by this user
Quote this message in a reply
01-31-2018, 08:10 PM
Post: #29
RE: New FIRMWARE !
(01-31-2018 08:03 PM)Voldemar Wrote:  Me too. Also on virtual calculator.

I cannot reproduce: in Geometry have already some curves, Symb -> in a void field New then OK I get "undef" in the field (then it is apparently not easy to delete it) but no restart, both HC and VC.
Are you start with a void Symb list or there are already items?

Salvo


Attached File(s) Thumbnail(s)
   

∫aL√0mic (IT9CLU), HP Prime 50g 41CX 71b 42s 12C 15C - DM42 WP34s :: Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
01-31-2018, 08:11 PM
Post: #30
RE: New FIRMWARE !
(01-31-2018 08:03 PM)Voldemar Wrote:  
(01-31-2018 07:24 PM)Guenter Schink Wrote:  [*]APP
[*]Geometry
[*]Symb
[*]New
[*]OK
Calculator restarts. Someone else with the same experience?
Me too. Also on virtual calculator.
Not having real calculator, but my Virtual one inserts 'undef' into edited field.

       

Geocaching Coords Solver, Number of triangles Puzzle
Find all posts by this user
Quote this message in a reply
01-31-2018, 08:22 PM
Post: #31
RE: New FIRMWARE !
(01-31-2018 08:10 PM)salvomic Wrote:  
(01-31-2018 08:03 PM)Voldemar Wrote:  Me too. Also on virtual calculator.

I cannot reproduce: in Geometry have already some curves, Symb -> in a void field New then OK I get "undef" in the field (then it is apparently not easy to delete it) but no restart, both HC and VC.
Are you start with a void Symb list or there are already items?

Salvo

Ok. I had started with an empty list, and it crashed. Now after I have entered an item it doesn't do that any longer. Now I can't reproduce this behaviour.

Günter
Find all posts by this user
Quote this message in a reply
01-31-2018, 08:27 PM
Post: #32
RE: New FIRMWARE !
(01-31-2018 08:11 PM)chromos Wrote:  my Virtual one inserts 'undef' into edited field.
Tried again. Yes, inserts «undef». First time was application error and application closed.
Just tried after calculator reset, application error.
Find all posts by this user
Quote this message in a reply
01-31-2018, 08:32 PM
Post: #33
RE: New FIRMWARE !
(01-31-2018 08:22 PM)Guenter Schink Wrote:  Ok. I had started with an empty list, and it crashed. Now after I have entered an item it doesn't do that any longer. Now I can't reproduce this behaviour.

Günter

so it could be a bug related at the starting with an empty list...

∫aL√0mic (IT9CLU), HP Prime 50g 41CX 71b 42s 12C 15C - DM42 WP34s :: Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
01-31-2018, 09:18 PM
Post: #34
RE: New FIRMWARE !
(01-31-2018 08:32 PM)salvomic Wrote:  
(01-31-2018 08:22 PM)Guenter Schink Wrote:  Ok. I had started with an empty list, and it crashed. Now after I have entered an item it doesn't do that any longer. Now I can't reproduce this behaviour.

Günter

so it could be a bug related at the starting with an empty list...

Yes, definitely. Now I was able to reproduce the behaviour. On both, the virtual and the real calculator.
  1. Reset
  2. App
  3. Geometry
  4. Symb
  5. New
  6. OK

Real calculator restarts, virtual calculator shuts down, showing a Windows error message.

Günter

Günter
Find all posts by this user
Quote this message in a reply
01-31-2018, 11:18 PM
Post: #35
RE: New FIRMWARE !
(01-31-2018 09:18 PM)Guenter Schink Wrote:  Yes, definitely. Now I was able to reproduce the behaviour. On both, the virtual and the real calculator.
  1. Reset
  2. App
  3. Geometry
  4. Symb
  5. New
  6. OK

Real calculator restarts, virtual calculator shuts down, showing a Windows error message.

Günter

I can confirm it.

Geocaching Coords Solver, Number of triangles Puzzle
Find all posts by this user
Quote this message in a reply
01-31-2018, 11:37 PM
Post: #36
RE: New FIRMWARE !
Just noticed on physical calculator. After update no more screen flickering when tap on battery symbol. Many thanks.
Find all posts by this user
Quote this message in a reply
02-01-2018, 07:29 PM
Post: #37
How do I update my firmware with this?
Since I haven't had the Prime for very long, I'm a relatively naive user of the Connectivity Kit. When I first acquired the Prime last last year, I updated the firmware using the Conn Kit.

Now when I tell it to update firmware, it shows the same version it already has:
"Update firmware: 20170710"

I did download the .zip file via ftp, but how does the Conn Kit make use of this?

Alan
Find all posts by this user
Quote this message in a reply
02-01-2018, 08:11 PM
Post: #38
RE: New FIRMWARE !
(01-31-2018 05:58 PM)Tim Wessman Wrote:  The fact that Prime is either the #1 or #2 recommend calculator for France and has a high level of interest on the main european TI site speaks rather highly in my mind...

Sadly there isn't that level of interest here in the UK.

In fact, if you go to HP UK's store there are only 4 machines advertised (2 financials, the 10s and the 300s), none of which is the Prime and all of which are out of stock...
Find all posts by this user
Quote this message in a reply
02-01-2018, 08:12 PM
Post: #39
RE: New FIRMWARE !
(02-01-2018 07:29 PM)striegel Wrote:  Since I haven't had the Prime for very long, I'm a relatively naive user of the Connectivity Kit. When I first acquired the Prime last last year, I updated the firmware using the Conn Kit.

Now when I tell it to update firmware, it shows the same version it already has:
"Update firmware: 20170710"

I did download the .zip file via ftp, but how does the Conn Kit make use of this?

Alan

try putting all file in the firmware folder in C:\Users\%your_user_name%\Documents\HP Connectivity Kit\Firmware

∫aL√0mic (IT9CLU), HP Prime 50g 41CX 71b 42s 12C 15C - DM42 WP34s :: Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-01-2018, 08:17 PM
Post: #40
RE: New FIRMWARE !
(02-01-2018 07:29 PM)striegel Wrote:  Now when I tell it to update firmware, it shows the same version it already has:
"Update firmware: 20170710"

I did download the .zip file via ftp, but how does the Conn Kit make use of this?
There is «HP Connective Kit» folder in Documents folder. There is «Firmware» folder. Delete all from «Firmware» folder. Unzip «HP_Prime_Calculator_Firmware_20180124» (13 files) to «Firmware» folder. Now You can update calculator to the latest firmware.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)