Post Reply 
Prime on a loop inserting a radical
02-04-2015, 09:54 PM (This post was last modified: 02-06-2015 11:27 AM by salvomic.)
Post: #1
Prime on a loop inserting a radical
I was trying to insert the radical \SQRT((t+i)/(-t+i))^i and Prime is gone on a loop without ending...
Also Emulator behaviors so: top right "clepsydra" (sand clock) working, and after several minutes a dialog box: "The application has crashed and will be restarted"...

With an expression like this first "Simplify" sent the calculator in crash also. The expression was c*t*e^((i/2)*ln((t+i)/(-t+i))), got applying "atrig2ln()" to the expression c*t*e^ATAN(t)... Hit "Simplify" on that expression also emulator (as Prime) hangs...

***
\( \left(\sqrt{ \frac{t+i}{-t+i} }\right) ^{i} \) -> crash
atrig2ln(c*t*e^ATAN(t)) -> -> \( cte^{(\frac{i}{2})\log{ \frac{(-t+i)}{-t+i} }} \) -> Simplify crash also
***

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-06-2015, 08:13 AM
Post: #2
RE: Prime on a loop inserting a radical
I tried this some 20 minutes ago, at first the sandclock worked, then it stopped, the calculator freezed and did not react to any keypresses.

After a long time I had to press the reset key (paper clip) to restart it.
Find all posts by this user
Quote this message in a reply
02-06-2015, 08:21 AM
Post: #3
RE: Prime on a loop inserting a radical
(02-06-2015 08:13 AM)retoa Wrote:  After a long time I had to press the reset key (paper clip) to restart it.

now I don't remember if I pressed, instead, On+Symb, or the Prime restarted by itself...

However is a strange "bug"...

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-06-2015, 08:28 AM (This post was last modified: 02-06-2015 08:30 AM by retoa.)
Post: #4
RE: Prime on a loop inserting a radical
It seems to be related to the imaginary i, I tried

\( \sqrt{((t+a)/(-t+a))^a} \)

and it works.

Then I stored a:=i, retried tha same expression and it freezed again.
Find all posts by this user
Quote this message in a reply
02-06-2015, 08:36 AM (This post was last modified: 02-06-2015 08:45 AM by salvomic.)
Post: #5
RE: Prime on a loop inserting a radical
(02-06-2015 08:28 AM)retoa Wrote:  ...
Then I stored a:=i, retried tha same expression and it freezed again.

yes!

Emulator (6975) crashes also with only \[ \left(\sqrt{\frac{1}{2}}\right)^{i} \]
help!

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
02-06-2015, 08:50 AM
Post: #6
RE: Prime on a loop inserting a radical
(02-06-2015 08:36 AM)salvomic Wrote:  ...

Emulator (6975) crashes also with only \[ \left(\sqrt{\frac{1}{2}}\right)^{i} \]
help!

Also my real Prime, it crashes already with

\( \sqrt{2}^i \)

Why ???
Find all posts by this user
Quote this message in a reply
02-06-2015, 12:28 PM
Post: #7
RE: Prime on a loop inserting a radical
xcas does not crash with these expressions, so the problem is only related to HP Prime.
Find all posts by this user
Quote this message in a reply
05-13-2015, 08:21 PM
Post: #8
RE: Prime on a loop inserting a radical
(02-06-2015 12:28 PM)retoa Wrote:  xcas does not crash with these expressions, so the problem is only related to HP Prime.

still the Prime hangs with the firmware 7820...
√2^i and the Prime goes on a loop; hint: On+Symb

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
05-13-2015, 08:26 PM
Post: #9
RE: Prime on a loop inserting a radical
Couldn't reproduce any of the errors reported here after the update. Never tried before though.
Find all posts by this user
Quote this message in a reply
05-13-2015, 08:34 PM
Post: #10
RE: Prime on a loop inserting a radical
(05-13-2015 08:26 PM)Marcio Wrote:  Couldn't reproduce any of the errors reported here after the update. Never tried before though.

(√2)^i here in Home ok: 0.9405+0.3396i

In CAS the calculation seems endless, and I can exit only with ON+Symb :-(

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
05-13-2015, 08:59 PM
Post: #11
RE: Prime on a loop inserting a radical
(05-13-2015 08:34 PM)salvomic Wrote:  
(05-13-2015 08:26 PM)Marcio Wrote:  Couldn't reproduce any of the errors reported here after the update. Never tried before though.

(√2)^i here in Home ok: 0.9405+0.3396i

In CAS the calculation seems endless, and I can exit only with ON+Symb :-(
Oh I see. Sorry about that.
Find all posts by this user
Quote this message in a reply
05-13-2015, 09:00 PM
Post: #12
RE: Prime on a loop inserting a radical
(05-13-2015 08:59 PM)Marcio Wrote:  Oh I see. Sorry about that.

never mind, no problem by you Smile

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
05-17-2015, 04:23 PM
Post: #13
RE: Prime on a loop inserting a radical
Same here, it crashes even with new firmware 7820.
Find all posts by this user
Quote this message in a reply
05-17-2015, 05:31 PM (This post was last modified: 05-17-2015 05:36 PM by Helge Gabert.)
Post: #14
RE: Prime on a loop inserting a radical
Yes, same here,

and interestingly, in CAS,

(sqrt(2))^i returns sqrt(2^i).
Find all posts by this user
Quote this message in a reply
05-17-2015, 06:09 PM
Post: #15
RE: Prime on a loop inserting a radical
I just discovered this bug today. Will be fixed for Xcas next week.
Find all posts by this user
Quote this message in a reply
05-17-2015, 06:46 PM
Post: #16
RE: Prime on a loop inserting a radical
(05-13-2015 08:34 PM)salvomic Wrote:  
(05-13-2015 08:26 PM)Marcio Wrote:  Couldn't reproduce any of the errors reported here after the update. Never tried before though.

(√2)^i here in Home ok: 0.9405+0.3396

In CAS the calculation seems endless, and I can exit only with ON+Symb :-(

Works fine for me in both Home and CAS: 0.9405... + 0.3397...i. You might check your settings. I have the latest firmware release.
Find all posts by this user
Quote this message in a reply
05-17-2015, 06:59 PM
Post: #17
RE: Prime on a loop inserting a radical
(05-17-2015 06:46 PM)John Colvin Wrote:  
(05-13-2015 08:34 PM)salvomic Wrote:  (√2)^i here in Home ok: 0.9405+0.3396
In CAS the calculation seems endless, and I can exit only with ON+Symb :-(
Works fine for me in both Home and CAS: 0.9405... + 0.3397...i. You might check your settings. I have the latest firmware release.

You're getting approximate results in CAS. Try again with the Exact option checked in the CAS Settings.

Ceci n'est pas une signature.
Find all posts by this user
Quote this message in a reply
05-17-2015, 07:14 PM
Post: #18
RE: Prime on a loop inserting a radical
(05-17-2015 06:59 PM)Mark Hardman Wrote:  
(05-17-2015 06:46 PM)John Colvin Wrote:  Works fine for me in both Home and CAS: 0.9405... + 0.3397...i. You might check your settings. I have the latest firmware release.

You're getting approximate results in CAS. Try again with the Exact option checked in the CAS Settings.
I assumed it was a settings issue. I tried Exact in Cas and got the symbolic answer
Sqrt(2^i) but it didn't hang or crash.
Find all posts by this user
Quote this message in a reply
05-17-2015, 08:01 PM (This post was last modified: 05-17-2015 08:03 PM by Mark Hardman.)
Post: #19
RE: Prime on a loop inserting a radical
(05-17-2015 07:14 PM)John Colvin Wrote:  I assumed it was a settings issue. I tried Exact in Cas and got the symbolic answer
Sqrt(2^i) but it didn't hang or crash.

The bug comes into play when the radical symbol (√) is used:

(05-13-2015 08:34 PM)salvomic Wrote:  (√2)^i here in Home ok: 0.9405+0.3396i
In CAS the calculation seems endless, and I can exit only with ON+Symb :-(

It has already been established by Helge that the bug does not present itself if the sqrt() function is used in place of the radical symbol:

(05-17-2015 05:31 PM)Helge Gabert Wrote:  Yes, same here,
and interestingly, in CAS,
(sqrt(2))^i returns sqrt(2^i).

Even the developer has agreed that this is a bug.

(05-17-2015 06:09 PM)parisse Wrote:  I just discovered this bug today. Will be fixed for Xcas next week.

Sometimes I miss Walter.
.
.
.
Nah...

Ceci n'est pas une signature.
Find all posts by this user
Quote this message in a reply
05-17-2015, 08:12 PM
Post: #20
RE: Prime on a loop inserting a radical
I used the square root key, not the Sqrt() function. I am not denying that there is a bug. I just can't seem to reproduce it. What are your CAS settings?
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)