Post Reply 
[41CL] image AMC-OSX
04-28-2014, 09:14 AM
Post: #1
[41CL] image AMC-OSX
Hi !
I'm a new Belgian user (so excuse my poor english) of the 41CL and I'm very happy (Tx Monte !)

I have a question : if I PLUG the image of AMC-OSX (AOSX, in 0x092) : I get [CCD"OS/X] (with image of CCD OS/X (CCDX, in 0x087) I get [CCD OS/X]).

But I was hoping to get the same described by Angel Martin here : http://www.*****/LibView.cfm?Command=View&ItemID=1168

What's wrong ?

Another question : I use a IR module 82242A (with printer 82240A) (or a 82413A printer) and a HP-IL 82160A (with digital cassette 82161A (switch HPIL Disabled, obviously)). But I like the Power CL Utilities (PWRL, in 0x114)... wich requires the library #4... but the HPIL with switch DISABLE conflicts in the page 4. So when I use the digital cassette, I must before unplug the IR module then switch HPIL on ENABLE. Not very practical !

Is another module like Power CL but wich don't requires library #4 ???

Many tx to all, especially Monte and Angel for the work !

Thierry.
Find all posts by this user
Quote this message in a reply
04-28-2014, 09:36 AM
Post: #2
RE: [41CL] image AMC-OSX
(04-28-2014 09:14 AM)ThRo Wrote:  I have a question : if I PLUG the image of AMC-OSX (AOSX, in 0x092) : I get [CCD"OS/X] (with image of CCD OS/X (CCDX, in 0x087) I get [CCD OS/X]).

But I was hoping to get the same described by Angel Martin here : http://www.*****/LibView.cfm?Command=View&ItemID=1168

your link doesn't work, but i can see you're using two different ROM images - done by different people at different times.

1. The CCD_OSX located at 0x807 is Raymond's extract of the CCD Module into a 4k module, including the OS/Extensions and a few more utilities.

2. The AMC_OSX located at 0x092 was my later version of the same, adding a few tweaks and some changes to the functionality.

There is also a newer version of the AMC_OSX located at 0x168 to 0x16A, page-switched but using the Library#4 as well - it's called the "OSX3" in the ROM library.

(04-28-2014 09:14 AM)ThRo Wrote:  Is another module like Power CL but wich don't requires library #4 ???

Well yes, there *is* one: the CL_Utils at 0x065 - it was made a few moons ago but I never bothered to update it after moving to the Library#4 version. - It lacks much of the current functionallity, and it made no sense to maintain both code streams - sorry about that.

Cheers,
ÁM

"To live or die by your own sword one must first learn to wield it aptly."
Find all posts by this user
Quote this message in a reply
04-28-2014, 10:00 AM
Post: #3
RE: [41CL] image AMC-OSX
Hi Ángel !

I don't use the two image at the same time : I was looking for the wich you described on the Warren Furlow's site in [http:// www. hp 41. org/ LibView. cfm? Command = View& ItemID= 1168] (remove all blank - Hope this time link work ! Otherwise replace "*****" with "*****" in the first post), but the AMC_OSX at 0x092 don't give the same functions you described in this pdf ??? OSX3 does ? I'll try this...

I 'll also try CL_utils (CLUT) instead of PWRL, but I don't see any documentation... I try to understand how it work !

Tx !

Thierry.
Find all posts by this user
Quote this message in a reply
04-28-2014, 10:17 AM
Post: #4
RE: [41CL] image AMC-OSX
(04-28-2014 10:00 AM)ThRo Wrote:  Hi Ángel !

I don't use the two image at the same time : I was looking for the wich you described on the Warren Furlow's site in [http:// www. hp 41. org/ LibView. cfm? Command = View& ItemID= 1168] (remove all blank - Hope this time link work ! Otherwise replace "*****" with "*****" in the first post), but the AMC_OSX at 0x092 don't give the same functions you described in this pdf ??? OSX3 does ? I'll try this...

I 'll also try CL_utils (CLUT) instead of PWRL, but I don't see any documentation... I try to understand how it work !

Tx !

Thierry.

Hi, long story short: links to TOS (the site you referred to) are disabled.

Welcome!

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
04-28-2014, 10:58 AM
Post: #5
RE: [41CL] image AMC-OSX
(04-28-2014 10:00 AM)ThRo Wrote:  I don't use the two image at the same time : I was looking for the wich you described on the Warren Furlow's site in [http:// www. hp 41. org/ LibView. cfm? Command = View& ItemID= 1168] (remove all blank - Hope this time link work ! Otherwise replace "*****" with "*****" in the first post), but the AMC_OSX at 0x092 don't give the same functions you described in this pdf ??? OSX3 does ? I'll try this...

If you mean this one: http://hp41.claughan.com/file/AMMC_OSX%20Manual.pdf

then yes, it is for the OSX/3 version - a much improved one, although also using the Library#4.

Cheers,
ÁM

"To live or die by your own sword one must first learn to wield it aptly."
Find all posts by this user
Quote this message in a reply
04-28-2014, 12:49 PM
Post: #6
RE: [41CL] image AMC-OSX
Hi !

Yes, I referred to that ! Strange, all links on the Warren's site are working for me... (I also have the DVD).

And now, I see [AMC"OS/X] in the bank 9 in wich I plug the image OSX3 : perfect, I'll try and now enjoy ! (I must simply unplug my HPIL 82160A, this is not so bad since I don't use it every day).

I discovered your work, wich is fantastic ! I use a HP41 daily since 1981, and now I've 9 "true" HP41 (C,CV,CX, half and fullnut), many modules, many peripherals and accessories... and one 41CL ! I plan now to buy the PilBox of JF Garnier...

If I have other questions, you'll see me again !.......

Tx all !
Find all posts by this user
Quote this message in a reply
04-28-2014, 01:05 PM
Post: #7
RE: [41CL] image AMC-OSX
(04-28-2014 12:49 PM)ThRo Wrote:  Hi !
I've 9 "true" HP41 (C,CV,CX, half and fullnut), many modules, many peripherals and accessories... and one 41CL ! I plan now to buy the PilBox of JF Garnier...

Welcome to the 41 Club, fellow! Wink

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)