HP Forums

Full Version: Hardware Voyager Emulator
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6
(10-30-2021 07:18 PM)Peet Wrote: [ -> ]
(10-30-2021 05:59 PM)rprosperi Wrote: [ -> ]Give it a try (making a 'good' 41 landscape layout) if you think you can make a big improvement.

Just a first try. As a blueprint for a Classic in a horizontal case, I would take the route from the HP-67 to the HP-97 and consider the "typical" Voyager for the key arrangement.

What?
No qwerty?
B^)
(10-06-2021 12:39 PM)revwillie Wrote: [ -> ]related: I found cheap AVR cables at a place called banggood.com but I might be waiting a long time to get mine.

My personal experience with Banggood orders is a bit spotty. (I am a USA customer)
One order of SMA connectors never arrived. (I don't recall, they may have back credited me.)
I haven't been able to get an SDR or a Spectrum Analyzer I ordered from them to work.
(I maybe underestimated the time needed to properly set up the software for each).
Some (goofy) LED party eyeglasses had a broken battery connection (and broke again after I soldered it).
And if you are reviewing/rating one of your purchases, you could hate it, but if you gave it 5 stars for something; like shipping packaging, it shows up as 5 stars overall.
A couple of times I've submitted questions about a shipment or product, and received an email saying that the submission was received and they will have someone respond in 24 hours (crickets).
When other customers submit questions on the Product page, I find that other customers often have better answers than Banggood Tech Support.
I still may order stuff from them in the future, but I do have my concerns.
Your Mileage May Vary.
Hi, Agarza!

Great work, really.
If not a commercial secret, I really would like to know how you can insert the firmware of one processor (in the case HP-15C, 41C) inside another one, I believe totally different.

At this age (54), I'm an engineer student!! Unbelievable, isn't it? I eally would appreciate some teaching about this.

Best regards from Brazil
Artur
(11-08-2021 11:26 AM)Artur - Brasil Wrote: [ -> ]Hi, Agarza!

Great work, really.
If not a commercial secret, I really would like to know how you can insert the firmware of one processor (in the case HP-15C, 41C) inside another one, I believe totally different.

At this age (54), I'm an engineer student!! Unbelievable, isn't it? I eally would appreciate some teaching about this.

Best regards from Brazil
Artur

It's no secret, there is enough space in RAM and FLASH to store the 11c and 16c calculators. Then you simply select the one you want to use (This is done with pointers).

"At this age (54), I'm an engineer student!!" WOW congrats!
(11-02-2021 05:49 PM)Ren Wrote: [ -> ]My personal experience with Banggood orders is a bit spotty. (I am a USA customer)
[...]
A couple of times I've submitted questions about a shipment or product, and received an email saying that the submission was received and they will have someone respond in 24 hours (crickets).
When other customers submit questions on the Product page, I find that other customers often have better answers than Banggood Tech Support.
I still may order stuff from them in the future, but I do have my concerns.
Your Mileage May Vary.

Same. Banggood has great prices, and if you're careful and read other reviews (and just poke around for duplicate products), then you should be okay.

However (and this is the BIG "catch" with them), if you have any issue whatsoever, you should just write it off. The standard practice with Banggood and their two clones is that you have to prove something is broken or not working. At least three pictures, and in most cases, you need to submit two videos as well. You must force them to admit something is broken, or else they won't give you the time of day. Support is slow and sometimes nonexistent. You will get offered points (for their club), credit memos, and then finally if you forcefully complain, they may give you a refund to your CC. I've been around and around with these guys and finally just gave up and decided it's not worth it unless the product is super cheap, or I know it's solid.

Thanks,
Bruce
(11-08-2021 11:26 AM)Artur - Brasil Wrote: [ -> ]At this age (54), I'm an engineer student!! Unbelievable, isn't it? I eally would appreciate some teaching about this.

Best regards from Brazil
Artur

I went back an got a B.S. in Computer Information Systems around middle age, while the education had its benefits, I was never hired in that capacity.

Good luck to you!
(11-08-2021 04:02 PM)agarza Wrote: [ -> ]
(11-08-2021 11:26 AM)Artur - Brasil Wrote: [ -> ]Hi, Agarza!

Great work, really.
If not a commercial secret, I really would like to know how you can insert the firmware of one processor (in the case HP-15C, 41C) inside another one, I believe totally different.

At this age (54), I'm an engineer student!! Unbelievable, isn't it? I eally would appreciate some teaching about this.

Best regards from Brazil
Artur

It's no secret, there is enough space in RAM and FLASH to store the 11c and 16c calculators. Then you simply select the one you want to use (This is done with pointers).

"At this age (54), I'm an engineer student!!" WOW congrats!

But how Arduino can proccess instructions of other processor? This is the fundamental question.
Best regards
Artur
(11-09-2021 11:16 PM)Artur - Brasil Wrote: [ -> ]But how Arduino can proccess instructions of other processor? This is the fundamental question.
This is called emulation :-)
You can read the Wikipedia article for an introduction.

J-F
(11-10-2021 09:24 AM)J-F Garnier Wrote: [ -> ]
(11-09-2021 11:16 PM)Artur - Brasil Wrote: [ -> ]But how Arduino can proccess instructions of other processor? This is the fundamental question.
This is called emulation :-)
You can read the Wikipedia article for an introduction.

J-F

you beat me to it.
Basically you are coding the cpu microcode. Hope it makes sense?
I was going to ask if it was an actual emulator or simulator but it appears you answered it when talking about the roms
how do you rom dump one of those that don't have any connectivity.
Hi everyone!

Finished my own unit!
Very nice - well done!
(11-30-2021 08:57 PM)ekaww Wrote: [ -> ]Hi everyone!

Finished my own unit!

Excelent!
Is It an issue of v0.85 version?
(12-03-2021 10:11 AM)ekaww Wrote: [ -> ]Is It an issue of v0.85 version?

It's December abbreviated in Spanish (Diciembre).

Originally the firmware had several languages for the Date/Time, but had to remove them for space limitations.

I don't know if anyone is interested in having multi languages for the Date/Time.

New firmware will fix this issue.
Hi,

Tip to fix DEC/DIC issue!
Why not have codetag??
(11-30-2021 08:57 PM)ekaww Wrote: [ -> ]Hi everyone!

Finished my own unit!



Hi,,
Why my calculator not have a codetag????????????
Hi,
You need to load the MEMORY CODE.
(01-07-2022 12:58 AM)ekaww Wrote: [ -> ]Hi,
You need to load the MEMORY CODE.

Hello!

How to load the memory code??
Is it bootloader????
Thanks you ......
Pages: 1 2 3 4 5 6
Reference URL's