07-10-2020, 09:05 PM
Hi all,
It all started when I wanted to charge the 2nd battery pack of my HP-75C. So I dug up my 82168A HP-IL modem that uses the same battery pack with the bonus that it uses the more popular 82059 charger (same as the one for HP-75C and most HP-IL equipment).
When the pack was charged I was ready to store the 82168A back in its hiding place when my 11-year old son showed up and asked what that thing was.
So I started explaining but I realized I needed a telephone handset to show how you used the modem.
Where do I find an 80s handset in my flat in Germany?
Pause, and then AHA! I remembered that at a conference some years ago I was given a toy that looked like an 80s handset, but it plugged into the audio/mic socket of my laptop so that I could do my Skype calls with what looked like a legacy phone. Cute, but useless until today! I dug it up and wow it fits like a glove to the 82168A.
With the charged battery pack as soon as I connected my HP-41 with the HP-IL interface the 82168A came up (the pale red flag flipped into a bright red flag). Now how to get the “Carrier Detect” flag to turn on (actually show us its darker green side).
I tried whistling and although back in the 80s I could get a fax to respond, I have lost the gift, and the 82168A ignored me.
So the demo ended poorly.
But getting the 82168A to work, kept bugging me but there was nowhere I could find another modem in my flat. Even my 12 year old Mac does not have a built-in modem.
So deadlock until I got another idea. Why not use the audio output of my laptop to simulate a 300 baud modem. Clearly it has the computing power to emit the chirps at the correct rate.
So I looked around and found the minimodem program written by Kamal Mostafa which did exactly what I wanted.
There is even a youtube video showing how to use the minimodem to connect to a BBS. Wow!
Of course minimodem wouldn’t work on my Mac, so I used one of my Raspberry PIs to install and run minimodem, and it WORKED!
I can type stuff on my Pi terminal window and it gets displayed on the HP-71B running a 5-line program.
As a bonus(?) the whole thing is battery powered!
[attachment=8612]
In the picture you can see that the 82168A is powered up and is detecting the carrier signal. I then typed a short message (blind, since there is no display connected to the Pi) and it showed up on the HP-71B screen.
The HP-71B program is as follows:
(It only allows data from the PI to be displayed on the HP-71B as I haven't managed to get minimodem to receive data)
**vp
http://www.series80.org
It all started when I wanted to charge the 2nd battery pack of my HP-75C. So I dug up my 82168A HP-IL modem that uses the same battery pack with the bonus that it uses the more popular 82059 charger (same as the one for HP-75C and most HP-IL equipment).
When the pack was charged I was ready to store the 82168A back in its hiding place when my 11-year old son showed up and asked what that thing was.
So I started explaining but I realized I needed a telephone handset to show how you used the modem.
Where do I find an 80s handset in my flat in Germany?
Pause, and then AHA! I remembered that at a conference some years ago I was given a toy that looked like an 80s handset, but it plugged into the audio/mic socket of my laptop so that I could do my Skype calls with what looked like a legacy phone. Cute, but useless until today! I dug it up and wow it fits like a glove to the 82168A.
With the charged battery pack as soon as I connected my HP-41 with the HP-IL interface the 82168A came up (the pale red flag flipped into a bright red flag). Now how to get the “Carrier Detect” flag to turn on (actually show us its darker green side).
I tried whistling and although back in the 80s I could get a fax to respond, I have lost the gift, and the 82168A ignored me.
So the demo ended poorly.
But getting the 82168A to work, kept bugging me but there was nowhere I could find another modem in my flat. Even my 12 year old Mac does not have a built-in modem.
So deadlock until I got another idea. Why not use the audio output of my laptop to simulate a 300 baud modem. Clearly it has the computing power to emit the chirps at the correct rate.
So I looked around and found the minimodem program written by Kamal Mostafa which did exactly what I wanted.
There is even a youtube video showing how to use the minimodem to connect to a BBS. Wow!
Of course minimodem wouldn’t work on my Mac, so I used one of my Raspberry PIs to install and run minimodem, and it WORKED!
I can type stuff on my Pi terminal window and it gets displayed on the HP-71B running a 5-line program.
As a bonus(?) the whole thing is battery powered!
[attachment=8612]
In the picture you can see that the 82168A is powered up and is detecting the carrier signal. I then typed a short message (blind, since there is no display connected to the Pi) and it showed up on the HP-71B screen.
The HP-71B program is as follows:
Code:
10 DIM A$[80]
20 RESTORE IO
30 ENTER :MODEM; A$
40 DISP A$
50 GOTO 30
(It only allows data from the PI to be displayed on the HP-71B as I haven't managed to get minimodem to receive data)
**vp
http://www.series80.org