So far I haven't been brave enough to open my PC-G850VS to install a speaker. Right now I have a piezo plugged into pins 2 and 7 of the 11-pin port. I also have a CE-126P printer/cassette inteface plugged into it (the piezo's wires are very thin) I notice that when I'm loading a program from cassette, the piezo plays the sounds from the cassette - the typical scratchy sound of recorded cassette data.
If I do finally open my unit and install the speaker internally, will it still play cassette data when doing a BLOAD?
You just want to recreate to 1980’s don’t cha
Is it loud then ? Or just background ?
I can see some benefit if it’s background cos at least you’d know you’re playing a part of the tape with data of some sort.
I will open my machine again tonight potentially and I’ll take some pertinent disassembly photos, and post them up. Then you’ll be able to move it to the correct position.
I wonder if there is complete continuity between the pads on the pcb (where present) and the relevant pins on the interface header.....?
(10-01-2018 04:17 PM)Zaphod Wrote: [ -> ]You just want to recreate to 1980’s don’t cha
Presumably, it's missing the on-screen "tape loading bars" (à la Commodore Vic20, C64, and Sinclair ZX Spectrum) for that perfect 80's experience!
(10-01-2018 04:42 PM)ijabbott Wrote: [ -> ] (10-01-2018 04:17 PM)Zaphod Wrote: [ -> ]You just want to recreate to 1980’s don’t cha
Presumably, it's missing the on-screen "tape loading bars" (à la Commodore Vic20, C64, and Sinclair ZX Spectrum) for that perfect 80's experience!
It does display an asterisk when it finds the right file as the TRS-80 did but it doesn't blink.
(10-01-2018 04:17 PM)Zaphod Wrote: [ -> ]You just want to recreate to 1980’s don’t cha
In the good old days, I was neither good nor old!
Ahhhhh TRS-80 ... and the two asterisks
All this talk about this unit has broken me down, I just ordered one. This all so soon after getting my DM42 too.
Has the manual been translated yet? These types of computers were very popular for a long time, too bad nobody makes such a thing any more.
(10-03-2018 06:43 AM)Sukiari Wrote: [ -> ]All this talk about this unit has broken me down, I just ordered one. This all so soon after getting my DM42 too.
well done !
Quote:Has the manual been translated yet? These types of computers were very popular for a long time, too bad nobody makes such a thing any more.
Next best thing, I started the idea of google translating the german version of the book on post 20, which then gave us a semi-readable english book.
Then 'jwhsu' took the idea on from that and edited out the hiccups and added more stuff to it.
Take a look at the longer 850 thread in this section:
http://www.hpmuseum.org/forum/thread-10520.html
The revised book is on post 39 in that thread.
(10-03-2018 06:43 AM)Sukiari Wrote: [ -> ]Has the manual been translated yet? These types of computers were very popular for a long time, too bad nobody makes such a thing any more.
Use the link in post #39 in this thread:
http://www.hpmuseum.org/forum/thread-10520.html
smp
(10-03-2018 06:43 AM)Sukiari Wrote: [ -> ]All this talk about this unit has broken me down, I just ordered one. This all so soon after getting my DM42 too.
Has the manual been translated yet? These types of computers were very popular for a long time, too bad nobody makes such a thing any more.
Welcome to the club! It was all the discussion about it plus the English translation of the manual that got me interested. I really like the implementation of C on this little machine.