Post Reply 
Programming with HP50g
08-07-2015, 09:53 AM
Post: #1
Programming with HP50g
I am beginner with HP50g.
I would like to start with programming. Can anybody find easy short programs (dealing with math or physics) in the net, which help me with my project?

Does anybody has some ideas how to start with little programs?
Find all posts by this user
Quote this message in a reply
08-07-2015, 10:05 AM
Post: #2
RE: Programming with HP50g
Try this:

http://www.hpcalc.org/hp48/docs/programm...inmarv.zip
Find all posts by this user
Quote this message in a reply
08-07-2015, 01:27 PM
Post: #3
RE: Programming with HP50g
A good introduction to User RPL programming:
http://www.hpcalc.org/details.php?id=1771

A good program for developing User RPL programs on a PC:
http://www.hpcalc.org/details.php?id=6600

Best regards
Visit this user's website Find all posts by this user
Quote this message in a reply
08-07-2015, 03:19 PM
Post: #4
RE: Programming with HP50g
(08-07-2015 10:05 AM)Gerald H Wrote:  Try this:

http://www.hpcalc.org/hp48/docs/programm...inmarv.zip

Excellent recommendation Gerald, you beat me to it!

There is no better single source of small programs, tips and techniques to learn (and quickly become impressed with the power of) RPL.

EVERY RPL user should review these great "marvels" from time to time.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
08-09-2015, 08:56 AM
Post: #5
RE: Programming with HP50g
A good site for beginners
http://www.area48.com/

att,
Find all posts by this user
Quote this message in a reply
08-09-2015, 01:06 PM
Post: #6
RE: Programming with HP50g
(08-09-2015 08:56 AM)Valfisio Wrote:  A good site for beginners
http://www.area48.com/

att,

Indeed, excelent place. Thanks for the tip.

JL
Find all posts by this user
Quote this message in a reply
08-09-2015, 08:17 PM
Post: #7
RE: Programming with HP50g
(08-07-2015 09:53 AM)tigger Wrote:  I am beginner with HP50g.
I would like to start with programming. Can anybody find easy short programs (dealing with math or physics) in the net, which help me with my project?

Does anybody has some ideas how to start with little programs?

I also suggest you to use 'HPUserEdit' . Creating and editing programs will be far more easy.
Find all posts by this user
Quote this message in a reply
08-10-2015, 03:43 AM
Post: #8
RE: Programming with HP50g
(08-09-2015 08:56 AM)Valfisio Wrote:  A good site for beginners
http://www.area48.com/

Am I the only one getting an error message when I try to access this site? I have it in my book marks and remember reading through it in the past, but I can't get to it with Firefox nor IE. Is anyone else having the same trouble?

Brad
Find all posts by this user
Quote this message in a reply
08-10-2015, 05:53 AM
Post: #9
RE: Programming with HP50g
(08-10-2015 03:43 AM)Brad Barton Wrote:  
(08-09-2015 08:56 AM)Valfisio Wrote:  A good site for beginners
http://www.area48.com/

Am I the only one getting an error message when I try to access this site? I have it in my book marks and remember reading through it in the past, but I can't get to it with Firefox nor IE. Is anyone else having the same trouble?

Brad

Forbidden

You don't have permission to access / on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Find all posts by this user
Quote this message in a reply
08-10-2015, 06:03 AM
Post: #10
RE: Programming with HP50g
(08-10-2015 03:43 AM)Brad Barton Wrote:  
(08-09-2015 08:56 AM)Valfisio Wrote:  A good site for beginners
http://www.area48.com/

Am I the only one getting an error message when I try to access this site? I have it in my book marks and remember reading through it in the past, but I can't get to it with Firefox nor IE. Is anyone else having the same trouble?

Brad

no trouble with this site, everything is fine (Safari 8.0.7, OS X 10.10.4)
Find all posts by this user
Quote this message in a reply
08-10-2015, 06:40 AM
Post: #11
RE: Programming with HP50g
http://www.area48.com/

works OK for me, very attractive & informative site even though a little dated.
Find all posts by this user
Quote this message in a reply
08-10-2015, 07:19 AM
Post: #12
RE: Programming with HP50g
(08-10-2015 05:53 AM)Tugdual Wrote:  
(08-10-2015 03:43 AM)Brad Barton Wrote:  Am I the only one getting an error message when I try to access this site? I have it in my book marks and remember reading through it in the past, but I can't get to it with Firefox nor IE. Is anyone else having the same trouble?

Brad

Forbidden

You don't have permission to access / on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Same here.
Find all posts by this user
Quote this message in a reply
08-10-2015, 07:23 AM
Post: #13
RE: Programming with HP50g
It's working now.
For many days I see the web being quite chaotic.
Vacation and low maintenance? Heat wave? Storms?
Find all posts by this user
Quote this message in a reply
08-10-2015, 09:25 PM
Post: #14
RE: Programming with HP50g
(08-10-2015 07:23 AM)Tugdual Wrote:  It's working now.
For many days I see the web being quite chaotic.
Vacation and low maintenance? Heat wave? Storms?

It doesn't for me. Forbidden

G√ľnter
Find all posts by this user
Quote this message in a reply
08-10-2015, 11:21 PM
Post: #15
RE: Programming with HP50g
(08-10-2015 03:43 AM)Brad Barton Wrote:  
(08-09-2015 08:56 AM)Valfisio Wrote:  A good site for beginners
http://www.area48.com/

Am I the only one getting an error message when I try to access this site? I have it in my book marks and remember reading through it in the past, but I can't get to it with Firefox nor IE. Is anyone else having the same trouble?

Brad

Can't load the page from either of a couple of different machines. Lots of potential reasons that people from different locations would have different results, including the server and/or site blocking http requests meeting certain criteria (origin IP, browser versions, or lots of other possibilities). It's also worth noting that my firewall/virus checking software on one computer blocked the attempt saying that the site potentially contained threats -- which sometimes simply means that there was something unexpected about the way it responded. My settings are fairly conservative on that machine.

So something's definitely not quite right with the site.
Find all posts by this user
Quote this message in a reply
08-11-2015, 02:31 PM
Post: #16
RE: Programming with HP50g
My thanks to everyone who reported success/failure on the site. I won't have to chase my firewall settings around, and will instead wait on the site maintainer to fix the problem.

If someone with access to the site finds a contact to the administrator, perhaps you could make them aware of the problem.

Thank you,
Brad
Find all posts by this user
Quote this message in a reply
08-15-2015, 12:15 PM
Post: #17
RE: Programming with HP50g
Maybe this can help:

http://web.archive.org/web/2015040510223...rea48.com/

It seems to be related to from where the request is send to the server. I'm in Germany and had no luck.

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
08-16-2015, 01:43 AM
Post: #18
RE: Programming with HP50g
(08-15-2015 12:15 PM)Marcus von Cube Wrote:  Maybe this can help:

http://web.archive.org/web/2015040510223...rea48.com/

It seems to be related to from where the request is send to the server. I'm in Germany and had no luck.

Thanks Marcus.
Find all posts by this user
Quote this message in a reply
08-28-2015, 05:38 PM (This post was last modified: 08-28-2015 07:14 PM by tigger.)
Post: #19
RE: Programming with HP50g
(08-07-2015 01:27 PM)BartDB Wrote:  A good introduction to User RPL programming:
http://www.hpcalc.org/details.php?id=1771

Quote:Do I have to sign in? Do I have to have an account? I can not see the content of the page.

Where do I have to click on?

Further advice would/could help.

tigger
A good program for developing User RPL programs on a PC:
http://www.hpcalc.org/details.php?id=6600

Best regards
Find all posts by this user
Quote this message in a reply
08-28-2015, 05:48 PM
Post: #20
RE: Programming with HP50g
(08-28-2015 05:38 PM)tigger Wrote:  Do I have to sign in? Do I have to have an acount? I can not see the content of the page.

Where do I have to click on?

Further advice would/could help.

tigger

Hi,

No account is needed to access HPCalc. All files are freely downloadable.

Clicking the links in my post should take you directly to the page with a downloadable zip file and a description and some details.

Best regards.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)