Post Reply 
WP-31s: inversion of conversion
11-10-2014, 10:43 AM
Post: #1
WP-31s: inversion of conversion
Hello,
I'm currently starting to use the WP-31s. I especially like the design of the overlay, which is arranged very clearly and has all the functionality that I need. (If programming and printer functions were added this would be the perfect calculator, but I understand that this would make the user interface more complex).

Many thanks to all who have made this possible!

I have one question concerning the unit conversion dialog: On the WP-34s it is possible to invert the conversion by pressing [f], and [B] (= 1/x) to change from e.g rad->° to °->rad. Is there a similar funtionality on the WP-31s? I couldn't find any hint in the manual.

Regards
Bernd
Find all posts by this user
Quote this message in a reply
11-10-2014, 08:18 PM (This post was last modified: 11-10-2014 08:21 PM by walter b.)
Post: #2
RE: WP-31s: inversion of conversion
Inverting survived as described for the WP 34S:

E.g. 4 acres->ha returns 1.619 (ha). Now press f B and you get 9.8842 (acres, equivalent to 4 ha). Press f CONV again to get 4 confirming 9.8842 acres correspond to 4 ha.

Sorry for not mentioning it in the manual.

d:-)
Find all posts by this user
Quote this message in a reply
11-11-2014, 07:40 AM (This post was last modified: 11-11-2014 07:45 AM by Bernd Grubert.)
Post: #3
RE: WP-31s: inversion of conversion
Thanks for the information.
It's a little embarrassing that I have described the procedure and not noticed that it actually works. May be this post helps other users who don't know the WP-34s.
Find all posts by this user
Quote this message in a reply
11-11-2014, 05:28 PM
Post: #4
RE: WP-31s: inversion of conversion
The reasoning behind f+B on the WP 34S was the 1/x label above the key. We should remap the function to f+F on the 31S because the key carries the 1/x label.

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)