Poll: What do you prefer?
This poll is closed.
Layout a) 50.00% 21 50.00%
Layout b) 50.00% 21 50.00%
Total 42 votes 100%
* You voted for this item. [Show Results]

Post Reply 
[43S] Let's try a poll on the new forum :-)
12-20-2013, 06:04 PM (This post was last modified: 12-20-2013 06:31 PM by walter b.)
Post: #1
[43S] Let's try a poll on the new forum :-)
Hi all,

Until the threaded views become viable, please allow me to ask you for your preference comparing two (2) alternatives:

a)     vs. b)    

Please NOTE:

a) will come with two menus TRIG and LOG containing
sin arcsin cos arccos tan arctan (unshifted)
sinh arsinh cosh arcosh tanh artanh (f-shifted)
and
ln e^x lg 10^x x³ \(log_{x}y\) (unshifted)
ln1+x e^x-1 lb 2^x ∛x (f-shifted),
respectively.

b) will come with the functions sinh, arsinh, cosh, arcosh, tanh, artanh, \(log_{x}y\), ln1+x, e^x-1, and ∛x put in X.FCN and without the menus TRIG and LOG.

Having read and understood that, please VOTE. Thanks in advance for your opinion.

d:-)
Find all posts by this user
Quote this message in a reply
12-20-2013, 06:42 PM
Post: #2
RE: [43S] Let's try a poll on the new forum :-)
Yahoo 100%

;-D
Find all posts by this user
Quote this message in a reply
12-20-2013, 06:45 PM
Post: #3
RE: [43S] Let's try a poll on the new forum :-)
(12-20-2013 06:42 PM)Geoff Quickfall Wrote:  Yahoo 100%

Not any more - 50/50 now ....

Anyway I would have voted for c) with the arithmetic keys on the correct side.
Find all posts by this user
Quote this message in a reply
12-20-2013, 06:50 PM
Post: #4
RE: [43S] Let's try a poll on the new forum :-)
Ahh!

:-(
Find all posts by this user
Quote this message in a reply
12-20-2013, 07:01 PM
Post: #5
RE: [43S] Let's try a poll on the new forum :-)
I agree with Geoff!

The arithmetic on the right side. Please
Find all posts by this user
Quote this message in a reply
12-20-2013, 07:15 PM
Post: #6
RE: [43S] Let's try a poll on the new forum :-)
But they are on the right side!
Find all posts by this user
Quote this message in a reply
12-20-2013, 07:46 PM (This post was last modified: 12-20-2013 07:46 PM by Geoff Quickfall.)
Post: #7
RE: [43S] Let's try a poll on the new forum :-)
Happened to me flying into LA years ago:
  • ATC: cleared to land on 24 left
  • Me: roger, cleared to land on 24 left
  • Captain: was that cleared to land on 24 left (not our normal landing runway which is 24 right)
  • Me: CORRECT (not right, but CORRECT)

Understood Thomas! :-)
Find all posts by this user
Quote this message in a reply
12-20-2013, 09:09 PM
Post: #8
RE: [43S] Let's try a poll on the new forum :-)
(12-20-2013 07:15 PM)Thomas Radtke Wrote:  But they are on the right side!

Left is right & right is wrong!
Big Grin

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
12-20-2013, 10:12 PM (This post was last modified: 12-20-2013 10:13 PM by aurelio.)
Post: #9
RE: [43S] Let's try a poll on the new forum :-)
(12-20-2013 09:09 PM)Massimo Gnerucci Wrote:  
(12-20-2013 07:15 PM)Thomas Radtke Wrote:  But they are on the right side!

Left is right & right is wrong!
Big Grin

Left or right non problem, but ENTER key always over the operators
Find all posts by this user
Quote this message in a reply
12-20-2013, 10:41 PM
Post: #10
RE: [43S] Let's try a poll on the new forum :-)
Both look great. Build it and I will be happy to buy one for $; € if it only works in SI.
Find all posts by this user
Quote this message in a reply
12-21-2013, 12:11 AM
Post: #11
RE: [43S] Let's try a poll on the new forum :-)
(12-20-2013 10:12 PM)aurelio Wrote:  Left or right non problem, but ENTER key always over the operators

But since ENTER on the right is wrong...

Tongue

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
12-21-2013, 02:18 AM
Post: #12
RE: [43S] Let's try a poll on the new forum :-)
(12-21-2013 12:11 AM)Massimo Gnerucci Wrote:  But since ENTER on the right is wrong...

Thoughtcrime! ENTER on the left has always been right.

There's one obvious thing about layout "A", it has a lot of room for more functions since trigonometrics and log functions have moved to their own menus. So I'll reserve my final pick for the fully realized layout.


Regards,
Howard
Find all posts by this user
Quote this message in a reply
12-21-2013, 06:01 AM
Post: #13
RE: [43S] Let's try a poll on the new forum :-)
(12-21-2013 02:18 AM)Howard Owen Wrote:  There's one obvious thing about layout "A", it has a lot of room for more functions since trigonometrics and log functions have moved to their own menus. So I'll reserve my final pick for the fully realized layout.
There won't be anything like a 'fully realized layout' A -- the numeric keys would stay this way without a yellow label. That's design, man Wink Just FYI.

d:-)
Find all posts by this user
Quote this message in a reply
12-21-2013, 07:16 AM
Post: #14
RE: [43S] Let's try a poll on the new forum :-)
(12-21-2013 06:01 AM)walter b Wrote:  That's design, man Wink Just FYI.

OK then. Without reserving judgement, I like it! Much less cluttered.


Regards,
Howard
Find all posts by this user
Quote this message in a reply
12-21-2013, 07:35 AM
Post: #15
RE: [43S] Let's try a poll on the new forum :-)
(12-21-2013 06:01 AM)walter b Wrote:  
(12-21-2013 02:18 AM)Howard Owen Wrote:  There's one obvious thing about layout "A", it has a lot of room for more functions since trigonometrics and log functions have moved to their own menus. So I'll reserve my final pick for the fully realized layout.
There won't be anything like a 'fully realized layout' A -- the numeric keys would stay this way without a yellow label. That's design, man Wink Just FYI.

d:-)

this way numeric keys are more viewable!
Find all posts by this user
Quote this message in a reply
12-21-2013, 09:23 AM
Post: #16
Closing time of this poll (was RE: [43S] Let's try a poll on the new forum :-) )
Since there is no other way you are allowed to learn this: please note this poll was set up yesterday for five days, i.e. 120h. I leave it to you to calculate the stop date & time.

d:-)
Find all posts by this user
Quote this message in a reply
12-21-2013, 10:54 AM
Post: #17
RE: [43S] Let's try a poll on the new forum :-)
(12-21-2013 02:18 AM)Howard Owen Wrote:  
(12-21-2013 12:11 AM)Massimo Gnerucci Wrote:  But since ENTER on the right is wrong...

Thoughtcrime! ENTER on the left has always been right.

Exactly!
You're right... and I am not wrong. Smile

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
12-21-2013, 11:14 AM
Post: #18
RE: [43S] Let's try a poll on the new forum :-)
Option a for me. Less cluttered.


Pauli
Find all posts by this user
Quote this message in a reply
12-21-2013, 12:39 PM (This post was last modified: 12-21-2013 12:41 PM by aurelio.)
Post: #19
RE: [43S] Let's try a poll on the new forum :-)
(12-21-2013 11:14 AM)Paul Dale Wrote:  Option a for me. Less cluttered.


Pauli

Fill the poll, Pauli, option "b" is going to win, we need your vote, nowSmile
Find all posts by this user
Quote this message in a reply
12-21-2013, 06:33 PM
Post: #20
RE: [43S] Let's try a poll on the new forum :-)
I voted for B, but would have no problem with A. Seems like a waste of space not to make use of the key's secondary area which is designed to take a legend. It's no more cluttered than most of the calcs we're used to.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)