newRPL - build 1255 released! [updated to 1299]

[Claudio L.]

(12-17-2017 09:22 PM)Francois Lanciault Wrote:  Hi Claudio,

Just installed the latest firmware.

Just to let you know, after re-boot I ended up with a bunch of new variables. One was called "OOOOAAA", one other "Local", the last one I don't remember. I just purged them and there is no side effects.

I tried the USB communication with the PC host. It works as you described. Lots of possible applications I can see. Need to have the simulator installed on my mac first.

Will try the matrix commands next.

François

Glad to hear USB works as expected, I only tested on my hardware so I'm not 100% sure the timings work for all hardware combinations.
Regarding the weird variable names, that happens when a variable name becomes corrupted, the recovery runs on power up and recovers the objects but assigns a random name. Most likely those were settings with names in ROM. Perhaps the names moved in the ROM (shouldn't but maybe I messed something up). In any case, settings are recreated and nothing bad happens. When you see those weird names, always take a look at what they are. If is not something important you lost, they are safe to delete.