Hide soft menus?

[JDW]

When I type VERSION and press ENTER, it shows me:

Version HP50-C
Revision #2.15

Furthermore, holding down the + and the - keys while pressing the reset button on back shows:

BOOT V4.01.03.03

I also performed the FLASH test and the SRAM test and found no problems.

Using ON-A-F to reset followed by installation of your library in either Port 1 or Port 2 does not resolve the problem. There are no other libraries installed, except for the 3 stock HP equation and periodic table libraries that always appear in Port 2 (flash):

226: EQLIB
227: EQLIB
229: PRTBL

So again, for me, your library works fine in Port 0 (assuming I don't have any other big libraries in Port 0), but your library gives me trouble in Port 1 and Port 2.

I would like to encourage David and others reading this thread to give your library a try in Port 1 and Port 2 so we then have a greater pool of data that can be analyzed.

Thanks.

James