Hide soft menus?

[JDW]

(12-10-2016 02:14 AM)DavidM Wrote:  Try holding down the backspace key immediately after doing ON-C to warmstart. Keep it down until you see the normal stack display. That will block the configuration programs for libraries from running the way they normally do on a warmstart.

Thanks for the tip, David. Please note that I edited/updated my previous post several times before spotting your reply, so refer to that post to see all I tried. But I just reinstalled my big 722 library and then Andreas library, which prevents CAT from displaying and which locks up the 50g with the hourglass. Using your tip allows me to PURGE Andreas' Library without resorting to a RESET.

So the lockup problem I am seeing is either an incompatibility with my large 772 library, or it is locking up simply due to insufficient RAM in IRAM. For those of you testing along with me, try adding a big Library like 132KB in size or an equivalent number of Libraries in IRAM, then install Andreas' Library, then try to open CAT and see if you get a lockup. Andreas, you should try that too.

Thanks,

James