Post Reply 
HP-75 - SRQ/interrupt and HPILCMDS.LEX?
07-20-2016, 09:04 PM
Post: #5
RE: HP-75 - SRQ/interrupt and HPILCMDS.LEX?
(07-20-2016 08:28 AM)Martin Hepperle Wrote:  2) The only place where I found the HPILCMDS.LEX file is at Vassilis Prevelakis series80 web site. It hosts the 1252 bytes version which works fine. I read somewhere that there was a slightly improved version which is 1253 bytes long. Does someone have this version?
In the old days the original HPILCMDS.LEX file was obviously withdrawn from the swap disks due to copyright issues. Thus is it not part of the collections that I checked out.

Martin,

Score so far:

2 x HP-75C, 2 x HP-75D, 3 x Original HP " HPILCMDS I/O Utilities" Mag Cards, labeled "00075-82023 Rev. A"

Good card reads on 2 sides: 0

It appears side-1 of all cards were erased by prior owner.

However I did succeed in reading side-2 on one of the cards and it confirms a file size of 1252 bytes. So, Rev "A" is 1252 bytes, which I guess indicates we are looking for Rev "B".

I will also examine original copies of the Atlanta Conference swap disks, plus another disk I got from Mike Markov in early 1990, which appears to not be one of the later "Swap Disks".

Where did you find a 75C LEX file on series80.org ?

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP-75 - SRQ/interrupt and HPILCMDS.LEX? - rprosperi - 07-20-2016 09:04 PM



User(s) browsing this thread: 4 Guest(s)