LED display available

[BartDB]

(06-25-2015 10:01 PM)PANAMATIK Wrote:  I ordered some display modules in germany for this project. They have the same price than in US but in Euro.

I don't want to sell the bare boards. First I made a mistake as described above and the assembly is somewhat special. Second I will at least get some benefit for going on with these works.

Therefore I offer the assembled boards for 30 Euro + shipping. The components are 10 Euro, the board is another 10, and the rest is intended to keep me happy You could spare 10 Euro with the bare boards, but ...

If you want to order please PM or mail, I can deliver from tomorrow.

Bernhard

OK, sorry, I am not interested in complete boards. As I stated I have already some displays (HP 5082-7414, same pin-out as QDSP6064).

On the Commodore's:
The P-50 and PR-100 also have 14 digit units but only use 12.
Others like the 4190 use all 14 digits. For these I have purchased 3-digit displays to build up 14 digits using 2x 3-digit + 2x 4-digit modules.

I will probably design my own PCB and see if I can make one board to accommodate both 12 and 14 digits by mounting different number of LED modules (possibly with some "jumper" pads for the different configurations) - it would be a waste to use the rather more scarce 3-digit modules in units that don't need them.

It is just that this has been a "to-do" for quite some time now .

Best regards.