Post Reply 
HP 32E - Zeros in display / blank display.
03-11-2015, 11:38 AM (This post was last modified: 03-11-2015 11:42 AM by PANAMATIK.)
Post: #9
RE: HP 32E - Zeros in display / blank display.
(03-10-2015 10:42 PM)Marcus von Cube Wrote:  
(03-10-2015 03:53 PM)PANAMATIK Wrote:  And the number of permutations for the order of the three chips is only three factorial 3!=6. I will try that.

They might work in any order if they are all wired in parallel and decode their addresses themselves.

You are right! I should have known it by myself. I made the experiment with a working 31E, which has two chips and I interchanged them. It worked in both positions.

Then I tried to repair the HP-33E. I "dremel"d the defective chip and soldered a wire to the board but without success.
       

Then I exchanged components from the 31E to 33E and back to find the defective part. It was indeed the (I assume RAM) chip 00031 A0008SGP. I replaced it by 00031 B0008SGP from 31E and my HP-33E works completely!
   
But I need another 0031 A0008SGP for the HP-31E now.

Thanks for your suggestions.

Bernhard

That's one small step for a man - one giant leap for mankind.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP 32E - FIXED - SOLVED - vikram86 - 03-10-2015, 02:50 AM
RE: HP 32E - Zeros in display / blank display. - PANAMATIK - 03-11-2015 11:38 AM



User(s) browsing this thread: 1 Guest(s)