[FRAM71] Pre-Production Batch
|
06-05-2015, 09:44 AM
(This post was last modified: 06-05-2015 02:15 PM by Oulan.)
Post: #122
|
|||
|
|||
RE: [FRAM71] Pre-Production Batch
What model of programmer could be used to re-program the module ?
- on radisospare, I found nothing ( http://fr.rs-online.com/ ) - on mouser nothing ( http://www.mouser.fr ) - on conrad nothing( http://www.conrad.fr/ ) ACTEL LC Programmer seems not to be manufactured anymore Thanks in advance P.S. after many more configuration tests (and memory lost), my fram71 was certainly hard-reseted. I have now a nice config with FORTH at E0000, MATHROM, JPCROM and full memory (in this case I loose F0000-FFFFF segment as FORTH is installed) 64K iram, rest RAM. I will stay with this config until I open the 71 to solder the OD wire ... |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)