HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / WP34S Reset during printing

Post Reply 
WP34S Reset during printing
09-30-2014, 08:08 PM (This post was last modified: 09-30-2014 08:10 PM by Didier Lachieze.)
Post: #6
Didier Lachieze Offline
Senior Member
 		Posts: 1,625
Joined: Dec 2013
RE: WP34S Reset during printing
(09-30-2014 08:00 PM)Dieter Wrote:  
(09-30-2014 07:52 PM)Marcus von Cube Wrote:  I tried hard to minimize the power consumption of the IR circuit by generating the pulses with very little CPU intervention but the strain on the cells may still be an issue.

While we're at it: I wonder if anyone here may use some kind of external power supply for the 30B/34s. Maybe some kind of power pack (with D cells ;-)) or simply an AC adapter. Do you think this would make sense? How could such a power source connect with the 30B/34s hardware?

Dieter

If you have installed Harald's USB board in your 34S you should be able to power it from USB.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: WP34S Reset during printing - Dieter - 09-30-2014, 08:00 PM
RE: WP34S Reset during printing - Didier Lachieze - 09-30-2014 08:08 PM
RE: WP34S Reset during printing - Dieter - 09-30-2014, 08:46 PM
RE: WP34S Reset during printing - walter b - 09-30-2014, 09:06 PM
RE: WP34S Reset during printing - walter b - 09-30-2014, 07:56 PM
RE: WP34S Reset during printing - walter b - 09-30-2014, 08:06 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication