Post Reply 
Acron RPN announces v3.0 BETA
08-31-2017, 01:09 PM (This post was last modified: 08-31-2017 01:25 PM by vanLudwig.)
Post: #5
RE: Acron RPN announces v3.0 BETA
Bravo - I hadn't expected anyone to figure out those solver methods until I wrote a tutorial. Glad to see that the weekend I spent writing that layout documentation wasn't for naught.

In case you hadn't noticed, the solver methods play nice together so that you don't have to keep re-entering the equation. For instance, immediately after finding the zero of tan(x)-sqrt(x) is 0.6949, you can press deriv to learn that the slope at 0.6949 is 1.095. Acron RPN will see the zero() on the top of the stack and assume those are the parameters you want for the deriv function.

You also might want to make room for the MathWhere function - it can be really handy too. For instance
  • Create a function for sec(x*PI/10). Press x, PI, *, 10, /, sec
  • Press x again as the variable for the Where
  • Enter 0 as the value for the Where
  • Press Where. You see that the sec(x*PI/10)|x=0 is 1.
  • Now you can enter 1 and immediately press Where again. It computes the sec(x*PI/10)|x=1
  • Enter 2 and press Where again. It computes the sec(x*PI/10)|x=2
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Acron RPN announces v3.0 BETA - vanLudwig - 08-27-2017, 05:49 PM
RE: Acron RPN announces v3.0 BETA - vanLudwig - 08-31-2017 01:09 PM
RE: Acron RPN announces v3.0 BETA - Dieter - 09-07-2017, 06:51 AM
RE: Acron RPN announces v3.0 BETA - Dieter - 09-07-2017, 07:59 PM
RE: Acron RPN announces v3.0 BETA - Dieter - 09-07-2017, 06:29 PM
RE: Acron RPN announces v3.0 BETA - Dieter - 06-15-2018, 06:26 PM



User(s) browsing this thread: 3 Guest(s)