Trying to flash a DM16L just drops me to "SERIAL CONSOLE"
|
06-14-2017, 02:12 PM
(This post was last modified: 06-14-2017 02:55 PM by Dave Britten.)
Post: #1
|
|||
|
|||
Trying to flash a DM16L just drops me to "SERIAL CONSOLE"
This is rather odd. I've got a 41L and a 16L. Both were running firmware 22 as of this morning, and I noticed 23 is out now. I backed up, updated, and restored the 41L with no problems.
I backed up the 16L, and when I press the RESET button to try to update it, I just get the boot info, and it drops into "SERIAL CONSOLE". I ran the keyboard test to verify there are no stuck keys, and I've flashed it with new firmwares in the past. Anybody seen this before? I'm flashing from a Windows 10 desktop. EDIT: Restarting the computer seemed to get it going for some reason. No idea why. Might be that there's some emulated serial control line (DTR? RTS?) in the USB-to-serial chip and associated driver that was "stuck" or something. So if you run into this issue, try rebooting, I guess. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Trying to flash a DM16L just drops me to "SERIAL CONSOLE" - Dave Britten - 06-14-2017 02:12 PM
RE: Trying to flash a DM16L just drops me to "SERIAL CONSOLE" - toml_12953 - 06-14-2017, 05:18 PM
RE: Trying to flash a DM16L just drops me to "SERIAL CONSOLE" - BarryMead - 06-14-2017, 06:53 PM
RE: Trying to flash a DM16L just drops me to "SERIAL CONSOLE" - Dave Britten - 06-14-2017, 07:25 PM
RE: Trying to flash a DM16L just drops me to "SERIAL CONSOLE" - grsbanks - 06-15-2017, 09:05 AM
|
User(s) browsing this thread: 1 Guest(s)