Post Reply 
Unstable 49G
03-19-2016, 10:27 AM
Post: #3
RE: Unstable 49G
(03-19-2016 06:39 AM)Tugdual Wrote:  I had something very similar on my old 48g. While I don't think the two machines share a lot in common, may be it can help you to know that the issue was a defective electrical contact on batteries. I used sand paper on metal plates that were corroded and the 48g is kicking again. I guess the 49g is using springs like the 50g but you might still want to investigate in that sense?

I cleaned all the contacts but nothing is happen.
Check my video about this problem: https://youtu.be/4CuhS8xxwLk

Csaba




Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Unstable 49G - Csaba Tizedes - 03-18-2016, 10:19 PM
RE: Unstable 49G - Tugdual - 03-19-2016, 06:39 AM
RE: Unstable 49G - Csaba Tizedes - 03-19-2016 10:27 AM
RE: Unstable 49G - Csaba Tizedes - 03-19-2016, 11:28 AM
RE: Unstable 49G - Gerald H - 03-19-2016, 02:54 PM
RE: Unstable 49G - Tugdual - 03-19-2016, 12:53 PM
RE: Unstable 49G - Csaba Tizedes - 03-19-2016, 01:06 PM
RE: Unstable 49G - DavidM - 03-19-2016, 04:35 PM
RE: Unstable 49G - Tugdual - 03-19-2016, 02:50 PM
RE: Unstable 49G - Tugdual - 03-19-2016, 04:51 PM
RE: Unstable 49G - Csaba Tizedes - 04-04-2016, 09:01 AM
RE: Unstable 49G - Tugdual - 04-04-2016, 09:22 AM



User(s) browsing this thread: 1 Guest(s)