Post Reply 
[WP 34S] I/O Error
06-19-2015, 10:52 AM (This post was last modified: 06-19-2015 11:02 AM by Marcus von Cube.)
Post: #2
RE: [WP 34S] I/O Error
(06-19-2015 03:09 AM)Sanjeev Visvanatha Wrote:  I upgraded my 34S with Harald's USB board. After troubleshooting some bad soldering (I'm an amateur!), I have a working USB board. One issue I have noticed is that I get an I/O Error when transferring, for example, the stats registers to the Windows Emulator. Transferring from the Windows Emulator to the 34S seems to work fine.

Could I get some pointers on what to look for? Tips, suggestions welcome. Thanks in advance!

I fear this is a bug in the Windows emulator. It looks like a race condition. Have you tried Pascal's Qt implementation? This might work better then mine.

Edit: I assume that you have the crystal installed on your device. Otherwise it might help to enter a speed factor in X (between 80 and 120, value in %) on the calculator before starting the transfer.

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[WP 34S] I/O Error - Sanjeev Visvanatha - 06-19-2015, 03:09 AM
RE: [WP 34S] I/O Error - Marcus von Cube - 06-19-2015 10:52 AM
RE: [WP 34S] I/O Error - Marcus von Cube - 06-19-2015, 08:10 PM
RE: [WP 34S] I/O Error - pascal_meheut - 06-19-2015, 08:16 PM



User(s) browsing this thread: 1 Guest(s)