Post Reply 
WP34S clock failure
06-01-2015, 10:02 AM
Post: #1
WP34S clock failure
A few weeks ago I setup my first WP34S with xtal and keyboard-overlay. Great work! Many thanks to all the softworker and especially to Walter for this great manual. This calculator is perfect suited to my needs.

So yesterday I setup a second device for my office. After preparing the hardware I flash it with the calc_xtal_full-binary and check the stopwatch. It works and so I close the cover and fasten the screws. While I adjust the settings the calculator shows a strange behaivior:
I call SETDAT with X = 31.052015. The Display shows "Wait" for 10 seconds and then "Reset". The same happens with SETTIM and X = 22.1500. When I call DATE and TIME I get 1.012007 and 0.0109. So the clock ist not ajustable but running since 1minute : 9seconds.

More facts:
VERS = 34S33T3678
XTAL = true
BAT = 2,9 voltmeter shows 3,025V

Today I flash the binary a second time. I supply the calculator with an external powersupply (3V) and measure the current. During SETTIM and SETDAT the current rises up to 20mA in peak. Voltage is stable but the calculator shows the same behaivior as before.

Any help will be welcome.

Many thanks in advance,
Michael
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP34S clock failure - smtschmidt - 06-01-2015 10:02 AM
RE: WP34S clock failure - Paul Dale - 06-01-2015, 10:23 AM
RE: WP34S clock failure - smtschmidt - 06-01-2015, 11:01 AM



User(s) browsing this thread: 1 Guest(s)