HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / Prime does not turn on after crashed update

Post Reply 
Prime does not turn on after crashed update
12-19-2013, 06:36 PM (This post was last modified: 12-19-2013 06:49 PM by Tim Wessman.)
Post: #4
Tim Wessman Offline
Senior Member
 		Posts: 2,293
Joined: Dec 2013
RE: Prime does not turn on after crashed update
Hold down symb, press the reset button with a pin in the back while continuing to hold down symb. Plugging in a USB cable should power it up (should your battery be dead or something).
TW

Although I work for HP, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Prime does not turn on after crashed update - Tim Wessman - 12-19-2013 06:36 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication