50g Hangs on Graphics

[DavidM]

(05-01-2014 06:55 PM)Alvaro Wrote:  Hi DavidM,
Nothing helped. I manually purge all LIB and other stuff except the HP Orig. LIB.
Then, I repeat the procedure above and now I can not enter the "Table" menu any longer, it just beeps and nothing else. Before there was displaying a Table with Function values.
After re-flashing the HP50g, I can not enter the Table display from the Graphic Display also.
So there must be some problem with the other LIB that I have had installed.
I will install them one by one again and post here the result.

I believe it's normal to not be able to enter the table display directly if you're currently viewing the plot -- at least I couldn't do that with any settings I tried. If you see the plot, then press the ON key (or the CANCL softkey) to go back to the "PLOT - FUNCTION" display. From there, you should be able to view the table.

I verified this with a completely "fresh" 50g -- no libs or data installed in any port, no SD card installed, ROM version 2.15, just after a "MEMORY LOST" to make sure nothing else was changed.