HP 41 not working
|
12-20-2017, 05:13 AM
Post: #13
|
|||
|
|||
RE: HP 41 not working
(12-18-2017 05:08 PM)AndiGer Wrote: Can you descibe the spring solution in more details?AndiGer; mfleming's answer was quicker and just what I'd have said. I got mine from a regular seller at the flea market. I came back with a couple of drill bits for sizing the next week and bought an assortment that were about right. Obviously the thinner wire ones were easier to push on and plenty strong enough. The ones that mfleming found will have to be cut and the cut end cleaned up a bit on the inside anyway. At about 6 piecesX12; Get the right ones and you'll be the go-to guy around here for post repair kits for a while. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
HP 41 not working - AndiGer - 12-10-2017, 09:27 PM
RE: HP 41 not working - Frido Bohn - 12-11-2017, 10:35 AM
RE: HP 41 not working - AndiGer - 12-16-2017, 08:05 PM
RE: HP 41 not working - cruff - 12-16-2017, 09:18 PM
RE: HP 41 not working - jebem - 12-17-2017, 03:21 PM
RE: HP 41 not working - AndiGer - 12-17-2017, 05:16 PM
RE: HP 41 not working - jebem - 12-18-2017, 07:38 AM
RE: HP 41 not working - Frido Bohn - 12-18-2017, 11:40 AM
RE: HP 41 not working - jebem - 12-18-2017, 01:10 PM
Light at the end of the tunnel, or the drawer - d b - 12-18-2017, 04:59 PM
RE: HP 41 not working - AndiGer - 12-18-2017, 05:08 PM
RE: HP 41 not working - d b - 12-20-2017 05:13 AM
RE: HP 41 not working - mfleming - 12-19-2017, 03:17 AM
RE: HP 41 not working - AndiGer - 12-20-2017, 07:38 PM
|
User(s) browsing this thread: 1 Guest(s)