HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP15c CE POGO programming cable

Post Reply 
HP15c CE POGO programming cable
02-08-2024, 06:36 PM (This post was last modified: 02-08-2024 06:54 PM by Harald.)
Post: #23
Harald Offline
Senior Member
 		Posts: 807
Joined: Dec 2013
RE: HP15c CE POGO programming cable
I received my parcel from Jose today. Containing an HP12C, an overlay and a cable. Thanks a lot for theses fantastic products!

Since there seems quite open conversation about it, I assume it is ok to mention, using the detailed instructions on Jose's website, I copied the firmware from my 15c CE, patched it, saved the 12c firmware, installed the patched 15c firmware on the 12c and now have a 16c to play with.
I suppose as I bought a calculator with the 15c firmware, it is okay to use it in another machine. So long as I don't sell the modified machine.

Cheers,
Harald
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP15c CE POGO programming cable - Divasson - 01-25-2024, 10:48 AM
RE: HP15c CE POGO programming cable - Gene - 01-25-2024, 01:11 PM
RE: HP15c CE POGO programming cable - Harald - 02-08-2024 06:36 PM
RE: HP15c CE POGO programming cable - ebs - 02-12-2024, 11:36 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication