HP48G Connectivity Method in 2022
|
09-18-2022, 11:28 AM
Post: #10
|
|||
|
|||
RE: HP48G Connectivity Method in 2022---Ongoing
Firstly, thank you all. With a bit of patience, tedium and time, I've got the connectivity working.
The youtube video by 'Teknovo uno' was essential in leading me through all the tedium of Windows Compatibility Mode, Running as Administrator, etc.... I can now connect to the calculator and see all objects there. HOWEVER, in attempting a Backup of the calculator, a number of curious things happen: 1. The HP48 shows 'EXECTUTE COMMAND' AND 'EVAL STOP' in the display. 2. The Conn software seems delayed for a bit - in the 'Copying' window. 3. The connectivity returns a 'Connectin Error. Please check your connections.' window. 4, There is a new object in the HOME directory of the HP48 shown on the screen: '<<fLaG' 5. The Connectivity software is locked up . The HP48 is still in Xmodem Server state. 6. One must quit the connectivity software. 7. Restarting the connectivity software usually works, but sometimes reset the COM port selection. The connectivity software is sluggish in listing the available COM ports. So, at least I can do some connectivity, it would be nice if I could do a 'Backup'. I'll further test with other machines. Thank you again for your attention and assistance, TomC ps: The contents of that '<<fLaG' object is: %%HP: T(3)A(D)F(.); \<< 'fLaG' PURGE { # 18016073546728432d # 0d } STOF \>> (this must be a temp variable the Conn software uses and did not get purged as the process was terminated prematurely) =========================================================== (09-17-2022 04:06 PM)TomC Wrote: DavidM: |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)