programing the HP42S
|
10-20-2016, 07:13 PM
Post: #1
|
|||
|
|||
programing the HP42S
I am looking for someone w/ HP programing experience to program
my 42S. it is a program that allows me to enter numbers in ft and inches w/ fractions. and convert back to a decimal number. I have all of the "key strokes" and have it on another of my 42S calc. but I need a back up. I use this calc daily in my eng. consulting job. I am willing to pay for this service. will ship the calc. in the U.S.A. dave r |
|||
10-21-2016, 04:12 AM
Post: #2
|
|||
|
|||
RE: programing the HP42S
Can you copy the mnemonic commands from the working HP-42S to a piece of paper or enter in a text editor? Then you can key in the same commands to your second HP-42S?
Namir |
|||
10-21-2016, 11:32 AM
Post: #3
|
|||
|
|||
RE: programing the HP42S
I'm very familiar with programming the 42s and would be interested in at least seeing the program.
Are you looking to put it on a second HP 42s and just don't want to take the time? |
|||
10-21-2016, 10:15 PM
Post: #4
|
|||
|
|||
RE: programing the HP42S
(10-20-2016 07:13 PM)dave r Wrote: I am looking for someone w/ HP programing experience to program I don't quite understand, why don't you simply type in the program yourself? Do you have a printer for the 42s? If you do you could print the program and save some time typing it into the other calculator. Harald |
|||
10-21-2016, 10:20 PM
Post: #5
|
|||
|
|||
RE: programing the HP42S
He sent me the printout of the program. Someone else had entered it on his calculator a long time ago, the printout is from 1996 and he'd like to have it on a second calculator but doesn't know what all the commands on the printout mean or how to input them.
We're working on sorting it out. |
|||
10-22-2016, 05:58 AM
(This post was last modified: 10-22-2016 06:03 AM by RMollov.)
Post: #6
|
|||
|
|||
RE: programing the HP42S
This is mine:
Feet to meter hp42s 00 { 184-Byte Prgm } 01>LBL "F->M" 02 MAN 03 0.0254 04 STO 00 05 CLST 06 STO 01 07 STO 02 08 STO 03 09 STO 04 10 CLMENU 11 "FEET" 12 KEY 1 GTO 01 13 "INCH" 14 KEY 2 GTO 02 15 "/2" 16 KEY 3 GTO 03 17 "/4" 18 KEY 4 GTO 04 19 "/8" 20 KEY 5 GTO 05 21 "/16" 22 KEY 6 GTO 06 23 MENU 24 GTO 01 25>LBL 10 26 ADV 27 PRA 28 TONE 9 29 STOP 30 GTO "F->M" 31>LBL 01 32 STO 01 33 GTO 08 34>LBL 02 35 STO 02 36 GTO 08 37>LBL 03 38 1 39 2 40 GTO 07 41>LBL 04 42 4 43 GTO 07 44>LBL 05 45 8 46 GTO 07 47>LBL 06 48 16 49>LBL 07 50 STO 04 51 Rv 52 STO 03 53>LBL 08 54 CLST 55 CLA 56 RCL 01 57 AIP 58 |-"' " 59 0.3048 60 × 61 RCL 02 62 AIP 63 RCL× 00 64 + 65 RCL 03 66 X=0? 67 GTO 09 68 |-" " 69 AIP 70 |-"/" 71 RCL 04 72 AIP 73 ÷ 74 RCL× 00 75 + 76 0 77>LBL 09 78 Rv 79 |-""\LF" 80 + 81 ARCL ST X 82 |-" m" 83 PROMPT 84 GTO 10 85 END Example: 237' 8 1/2" 72.454 m 237' 8 1/4" 72.447 m |
|||
10-22-2016, 09:58 PM
Post: #7
|
|||
|
|||
RE: programing the HP42S
Thank you everyone for your in-put......
Logan is helping me install the program. see his video's on UTUBE |
|||
10-24-2016, 05:58 PM
Post: #8
|
|||
|
|||
RE: programing the HP42S | |||
10-24-2016, 06:08 PM
Post: #9
|
|||
|
|||
RE: programing the HP42S
(10-24-2016 05:58 PM)Jeff_Kearns Wrote:(10-22-2016 09:58 PM)dave r Wrote: Logan is helping me install the program. Oh you wouldn't believe how fishy I can be. Comes from all that tilapia my wife makes me eat ![]() He sent me an old program printout and I created three custom videos giving him a crash course in entering it: https://www.youtube.com/watch?v=JQMOOxup8bI |
|||
10-24-2016, 06:13 PM
Post: #10
|
|||
|
|||
RE: programing the HP42S
hmmm
Isnt "U" and "you" the same thing? |
|||
10-24-2016, 07:12 PM
(This post was last modified: 10-24-2016 07:12 PM by aurelio.)
Post: #11
|
|||
|
|||
RE: programing the HP42S | |||
10-24-2016, 07:21 PM
Post: #12
|
|||
|
|||
RE: programing the HP42S
I am a senior....... just trying to be up to-date with "modern" lingo.
even though in this case granted..... the actual website is YOUTUBE |
|||
10-26-2016, 05:39 PM
(This post was last modified: 10-26-2016 05:40 PM by Geoff Quickfall.)
Post: #13
|
|||
|
|||
RE: programing the HP42S
Dave, Dave, Dave,
If you are from Nashville it's UuuTube. And while we are at it, it's sodder not solder! Geoff :-) |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)